|
Appliances are deemed to comply in the frequency range from 300 MHz to 1 000 MHz if/ s4 v5 |3 w( W
both of the following conditions ( 1) and 2)) are fulfilled:
$ k, w' n3 ^9 t' `/ e# v7 D0 _1) all emission readings from the equipment under test shall be lower than the applicable; E/ I( y3 ]" @5 l2 n
limits (Table 2a) reduced by the margin (Table 2b);6 A$ }4 d1 I8 n* _
2) the maximum clock frequency shall be less than 30 MHz.: j9 s. H; A# \, ^& I( |, a/ V
If either of condition 1) or 2) is not fulfilled, radiated measurements in the frequency range
0 m$ K! h4 P. z6 |from 300 MHz to 1 000 MHz shall be conducted and the limits of Table 3 for that range
) p4 a* h: J) T# K5 oapplied. In any case the limits of Table 2a in the frequency range 30 MHz to 300 MHz
# a$ O$ U. k8 v; |) c$ Q" p; [shall be met.
3 q% F+ T1 P3 V0 d0 G: q. OTable 2b Margin when performing disturbance power measurement in the frequency range 30 MHz to 300 MHz# a; z! j# o# z8 ], g
Frequency range Quasi-peak dB (pW)
/ Q2 y; q$ H; Z+ {/ Q c200 to 300 0 to 10 dB -) N* F; \* D. p- m
当功率骚扰(DP)200到300MHzQP余量小于10dB时,辐射(RE)是需要测试的。参见CISPR14-1 2009 |
|