EMC指令2004/108/EC最新协调标准一览表

fasten · 发表于 2008-8-8 08:42

Summary list of titles and references of harmonised standards relating to EMC

This list replaces all the previous lists published in the Official Journal of the European Union. The Commission ensures the updating of this list.
However, this list does not have any legal validity; only publication in the Official Journal produces legal affect.

European Standardisation Organisation	Reference and title of the standard 1 P, _# F% K, f9 H (and reference document) 4 y- [- Q+ O5 i2 \|) _ F	Reference of the superseded standard / f( Z+ [& p8 S* S	Date of cessation of presumption of conformity of the superseded standard
CENELEC	EN 50065-1:2001 3 C1 z+ t" V' \$ i3 } Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 1: General requirements, frequency bands and electromagnetic disturbances ( j" e! G- g: i0 s) a& g	! \* X, E" o* [# q$ Q$ }0 l EN 50065-1:1991 & A) R0 i* S. `; M t2 t0 p+ n3 ]+ A1:1992 9 _% \|$ I7 m9 r + A2:1995 9 m" h- M) \9 I5 f+ A3:1996 # Q0 W, k% ^+ _, S4 n Note 2.1	% x( O' }# o' w: Z! E) _) o) l Date expired 0 e0 d3 L& a1 s( t, \' m(01.04.2003)
CENELEC	EN 50065-2-1:2003 + H- a& h( \|6 j$ e7 z: w" q Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 2-1: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in residential, commercial and light industrial environments 1 f! `3 e0 s9 d4 [1 R& A6 l	0 g7 b/ }7 _$ ]1 i1 \|% `( ` Relevant generic standard(s) 7 i/ S/ u9 I" J& M/ e; W Note 2.3	$ o& C# m- O4 A- GDate expired 4 n( t( ~7 J7 Z: r5 \(01.10.2004)
	Amendment A1:2005 to EN 50065-2-1:2003 1 v- y2 d" r8 W5 W+ l% P	Note 3 6 }! f: \|& m, F( m	01.07.2008
CENELEC	EN 50065-2-2:2003 4 g) d- E4 ] E. Y! V; W: M Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 2-2: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in industrial environments - c Y( D9 M% {) W; P/ p	# F5 Y: o2 @8 ]1 e6 O4 P9 \|Relevant generic standard(s) ! u* h. w1 b% _3 P3 a6 ^5 K/ b Note 2.3	. @* I3 }/ Q4 \$ \|6 ]Date expired 5 x5 A" H# m7 C (01.10.2004)
	Amendment A1:2005 to EN 50065-2-2:2003 8 i1 w- g G+ Y3 N* n	Note 3 % t$ ~' @4 K6 g. o. K; b: \3 B e	01.07.2008
CENELEC	EN 50065-2-3:2003 4 Z2 b7 D7 @8 C3 o9 ]Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 2-3: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 3 kHz to 95 kHz and intended for use by electricity suppliers and distributors ( \|# w; \) }# O9 t	; S7 s4 B8 R, V8 L6 b+ Z Relevant generic standard(s) / j3 J* M1 K. G! Z Note 2.3	; T8 n( P) \7 y% \; @$ R wDate expired . H" O, x4 l' E# l$ l$ D8 M(01.08.2004)
	Amendment A1:2005 to EN 50065-2-3:2003 0 x6 a) S3 d! l" `, ^! L$ w& }0 ] H	Note 3 I6 y$ l4 q6 X- T0 Z. `8 t	01.07.2008
CENELEC	EN 50083-2:2001 E" T7 U( @) T! C. \|; K4 e6 X( c Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment " T6 Y/ M" d. G" g; _6 q1 j	: Y, P* F; F7 c5 s EN 50083-2:1995 & d) o y, x$ @2 N+ A1:1997 # D; B* K6 t2 I7 P6 u+ zNote 2.1	% h# y. K: t2 `* D2 \|0 BDate expired " r0 `( u) d# V. d7 i (01.01.2004)
	Amendment A1:2005 to EN 50083-2:2001 ! R, f( R. h9 Q7 A2 V0 }- Q& ?' R' ~	Note 3 9 x4 v$ q c0 l% _% `	01.04.2008
CENELEC	EN 50083-2:2006 - p; `. q0 N& ]2 E7 y4 r Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment - T5 d5 \|, v. h7 R	! j6 \|: h4 F& r( P+ q, d7 rEN 50083-2:2001 + c, R! c9 U9 G2 k( T) P and its amendment ) S! X7 u& M m; V/ i Note 2.1	! k& n, d D3 ~$ U* M9 a 01.04.2009
CENELEC	EN 50090-2-2:1996 6 ?) l/ ?3 s7 O8 D9 k& E" f Home and Building Electronic Systems (HBES) - Part 2-2: System overview - General technical requirements 8 t; ]2 l4 C7 Q1 v	& K5 G2 j% q9 T$ j5 W2 r, ~Relevant generic standard(s) * Y( P/ \/ _, M5 x5 _. M Note 2.3	" z9 Q( P3 S. F7 j0 _) e* ODate expired 0 T' p, O6 r+ H( D: \|. M2 ^(01.10.1999)
CENELEC	EN 50091-2:1995 # m5 j0 b- `" C. GUninterruptible power systems (UPS) - Part 2: EMC requirements & X3 ~2 O& u: s$ p	% t) k0 H" }5 N% T4 V4 V9 W# K" SRelevant generic standard(s) 2 \|* g$ d* Q9 t2 S, bNote 2.3	9 L0 u# j' h' `! X. M& e, ?0 @; t. bDate expired 0 X/ a$ P% _" h( e% m(01.03.1999)
CENELEC	EN 50121-1:2006 : N. r) b, X( \|' }5 M' J Railway applications - Electromagnetic compatibility - Part 1: General + t0 \|( N# R; }$ w	" w" _1 z& A; l0 l& @ Relevant generic standard(s) 1 L, v6 b5 @2 [- N$ F) I5 u' u Note 2.3	7 n0 U0 _! D7 x01.07.2009
CENELEC	EN 50121-2:2006 9 Q, m2 T" x# U' IRailway applications - Electromagnetic compatibility - Part 2: Emission of the whole railway system to the outside world ; ?6 F, ]7 r* y7 a C; q	- ~4 \|; j: \|: p5 z: X2 w6 A2 gRelevant generic standard(s) + t3 l0 W8 S# B7 S1 RNote 2.3	3 v6 S- ^+ i! p% x, O1 z2 E: l 01.07.2009
CENELEC	EN 50121-3-1:2006 ; ~6 ]2 S2 b$ SRailway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle ' ~7 H) o, o/ l	# n2 ]4 j4 b+ } C' ?9 N( f) wRelevant generic standard(s) ( i7 w5 E7 v) k9 u4 m Note 2.3	2 ?# Y1 _& O+ _6 I% o1 P8 v01.07.2009
CENELEC	EN 50121-3-2:2006 7 G: C9 t; p# d& ~Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus ' k( a& T. d- L	$ l" b# l9 ]; F6 B# \Relevant generic standard(s) ' ^* R, W8 j) G5 a4 V- L Note 2.3	" P1 g4 Z9 }9 T! O) ^; o( p01.07.2009
CENELEC	EN 50121-4:2006 0 \|3 f9 U; q) q8 T( F' nRailway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus 3 ^" t, I- T- r. _/ ~" ]	. r5 W. ~# a, Z" \|# w3 ? Relevant generic standard(s) 2 m# a, _! R. s7 C# E. V) U Note 2.3	! {+ U! ]8 A; C 01.07.2009
CENELEC	EN 50121-5:2006 , e( ] P9 ~* b/ E# ~! N* t" b Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus ; c4 {4 B- [8 T	& N( j Q# {6 T, v3 N" ^Relevant generic standard(s) ) y) Y0 h% V7 m4 \: c Note 2.3	, N; P* X7 U# A8 n7 V 01.07.2009
CENELEC	EN 50130-4:1995 # S8 a+ P5 e8 w6 i4 OAlarm systems - Part 4: Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder and social alarm systems * r% Y) K) c8 K* o1 W	8 ]; ?* X* y; r7 uRelevant generic standard(s) ; W7 S( ~7 z; Q6 M FNote 2.3	! W: L% ?) I4 x2 y( \: ]! v Date expired , G& C4 ?, ?3 x$ P9 c(01.01.2001)
	Amendment A1:1998 to EN 50130-4:1995 . H# V3 U5 d! j2 \5 n# T% u	Note 3 ( C% [, F4 ^% `& `" l	Date expired * s: v# ]8 h: q5 ~' i8 A* Z! s (01.01.2001)
	Amendment A2:2003 to EN 50130-4:1995 1 s0 P1 v V- ? M	Note 3 ) U$ E4 }* z& \: S	01.09.2007
CENELEC	EN 50148:1995 5 E5 U1 C$ W5 Z; E' K. CElectronic taximeters # F5 C6 E2 E+ }+ V8 @, W	u% ^0 L; B+ t- uRelevant generic standard(s) ; T, @; v, o- B2 v, s/ y Note 2.3	2 G+ k# j+ F5 O( k j0 h. f Date expired : z6 N& E# E, t, v) K6 h1 s+ U+ y( K (15.12.1995)
CENELEC	EN 50240:2004 9 d' }0 O7 l& K! u$ e7 n Electromagnetic compatibility (EMC) - Product standard for resistance welding equipment ) K4 B7 e. g2 _# H8 X% S" T	: F6 j7 f5 L) X( V$ x Relevant generic standard(s) ; k& A, r) G7 i6 n$ eNote 2.3	' H2 z: R4 I" ] G. r/ _+ \|Date expired & j" i8 R5 T$ T$ H+ h1 _5 ]3 _ (01.04.2007)
CENELEC	EN 50263:1999 . C0 e& k7 ~6 K4 S' d* ^ Electromagnetic compatibility (EMC) - Product standard for measuring relays and protection equipment 4 v7 W' j* k6 Q; u- a$ ^) b	M" f) \2 G# Q2 f( ARelevant generic standard(s) ; ^, G# w8 n' p6 S2 JNote 2.3	6 F" U+ N. L/ E/ G+ DDate expired & s O( H9 v8 A+ \|(01.08.2002)
CENELEC	EN 50270:1999 ) m/ D. t7 X3 v$ c5 jElectromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen 3 z7 u' g7 u- J/ I( x	, R4 H* ]: ]; s Relevant generic standard(s) ! P6 g' F% D! Q4 E! P Note 2.3	9 @3 M+ M% [$ E$ `, m9 t4 u Date expired - z! e: }+ M# H( w: X6 v(01.10.2001)
CENELEC	EN 50293:2000 4 E* I3 T8 \' gElectromagnetic compatibility - Road traffic signal systems - Product standard . n( F8 E+ i5 a/ i! J1 S% I	$ T- [( J b) P8 F4 \' A; _ Relevant generic standard(s) 5 w* C6 j! e- i$ d Note 2.3	) Q7 h7 O/ ~6 ~6 D: R: C Date expired & N. Q7 d! L! ?! k6 @1 V ~( S5 B! A(01.04.2003)
CENELEC	EN 50295:1999 6 \|* I, c6 ]" P+ V" i. o9 r4 }- h/ BLow-voltage switchgear and controlgear - Controller and device interface systems - Actuator Sensor interface (AS-i) 3 H" j" T$ _+ q6 j+ p& o5 f3 L. V	2 P6 U! W5 ~ \' ]Relevant generic standard(s) Note 2.3	' \|: w6 `* a0 G5 ]3 o& h8 _Date expired ' T3 y* A5 \: X% P4 p# s) B% N5 J9 E(01.12.1999)
CENELEC	EN 50370-1:2005 5 L1 }8 d+ w6 f Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 1: Emission ! B; Q+ D- M( C+ R	; C! s! z# y0 }, M8 R) K: ARelevant generic standard(s) 4 j; n! v- }) M8 `Note 2.3	0 t7 ~" t9 [1 @+ x- v! @+ k& Q5 W01.02.2008
CENELEC	EN 50370-2:2003 9 v& e( g% M: e% aElectromagnetic compatibility (EMC) - Product family standard for machine tools - Part 2: Immunity + Y0 X* c$ d" b# P' A	2 q: e B6 `* c4 F/ Y; S- pRelevant generic standard(s) + ~7 u3 x! \|! D( QNote 2.3	6 g; d J% Y" h3 Y5 c: q2 BDate expired 5 D9 j. ^( U& I& m8 [0 H" n(01.11.2005)
CENELEC	EN 50412-2-1:2005 ( p/ ^- _1 u0 ]* Z Power line communication apparatus and systems used in low-voltage installations in the frequency range 1,6 MHz to 30 MHz - Part 2-1: Residential, commercial and industrial environment - Immunity requirements . N- H. A. S2 Z) D	$ ^7 r8 _% A4 m8 q$ x% a Relevant generic standard(s) - e% x L. B# N# {! iNote 2.3	- ~/ f- G2 }4 d8 \' }. G) q01.04.2008
CENELEC	EN 50428:2005 # ]; F$ {; r( E9 n Switches for household and similar fixed electrical installations - Collateral standard - Switches and related accessories for use in home and building electronic systems (HBES) 7 @; }& w6 x \|6 Y4 ~4 m% I* i! J	2 I; u7 U. n9 h" \|' j* K Relevant generic standard(s) 5 I2 z! X1 N6 N4 Y' \, D3 p% O Note 2.3	8 T: s7 U: p/ K+ a01.01.2008
CENELEC	EN 50470-1:2006 " s7 r2 {1 b. r& l0 w$ ` Electricity metering equipment (a.c.) - Part 1: General requirements, tests and test conditions - Metering equipment (class indexes A, B and C) \|& A& r& ]5 N, {/ E& `5 Q	) C+ h: ~ g- \& \8 }) ` Z Relevant generic standard(s) ! Y8 c; S+ X+ ]9 D. F$ bNote 2.3	8 j/ y" n, j1 g6 e7 h3 z. J. \|( U 01.05.2009
CENELEC	EN 55011:1998 6 r' Q+ U0 _( ]6 E* o# w4 \|Industrial, scientific and medical (ISM) radio-frequency equipment - Radio disturbance characteristics - Limits and methods of measurement , O( I& `( Q f. o8 Y (CISPR 11:1997 (Modified))	7 v u$ Z; J$ H( {6 aEN 55011:1991 ! c. b6 }3 F$ o; ~3 ~ + A1:1997 & q0 V7 i3 \|$ ?' ~5 W% m! V2 _ + A2:1996 . t/ k8 j" {/ P, l0 h% \|( X) a Note 2.1	1 z' z% n9 L4 w. I Date expired , n5 X: B, x7 \|0 l2 I (01.01.2001)
	Amendment A1:1999 to EN 55011:1998 6 M7 P' {/ U, Q' x& a( q (CISPR 11:1997/A1:1999)	Note 3 & R/ x& \$ l6 ]* \) l" A a, V- N	Date expired 3 n! M4 y# M3 m$ t! y0 M (01.08.2002)
	Amendment A2:2002 to EN 55011:1998 . a3 a& s, b+ s; Z* \|(CISPR 11:1999/A2:2002)	Note 3 7 r2 `+ U6 q7 _5 F0 g% L3 w	Date expired $ p2 ~- y, x& `/ F1 ]5 e+ ?/ p4 I(01.10.2005)
CENELEC	EN 55011:2007 * {( e" E9 l+ _; ]; A( JIndustrial, scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement 1 C# B( q7 g p# q (CISPR 11:2003 (Modified) . c4 I1 G9 b! ]% n9 ~7 h! i+ A1:2004 (Modified))	5 T$ E3 }0 [, q9 A z' r c+ REN 55011:1998 6 k' O+ K5 i5 {0 Eand its amendments 6 j. m" r% }7 n) d) ? Note 2.1	/ v! n+ J9 \|/ E9 e: y0 B& I01.11.2009
	Amendment A2:2007 to EN 55011:2007 $ o h# [0 \|' H) q, ](CISPR 11:2003/A2:2006)	Note 3 9 p, Y3 ^& U. w0 X	01.11.2009
CENELEC	EN 55012:2002 ! T2 f6 k' S5 H* E ?9 X7 fVehicles, boats and internal combustion engine driven devices - Radio disturbance characteristics - Limits and methods of measurement for the protection of receivers except those installed in the vehicle/boat/device itself or in adjacent vehicles/boats/devices . M; e. g) T6 Y8 K* y (CISPR 12:2001) 2 _# {# O- t. q1 ~ U. i+ A4 j! k; w* n5 {; O: C8 W. s: u Note 8	# C* P4 C$ v: BRelevant generic standard(s) 3 f) u" {$ v1 w! C+ m# i% ]9 o Note 2.3	0 u8 Y- Z- R m/ s. EDate expired p1 X; q7 [& b# x3 l5 T2 {, @1 A(01.02.2005)
	Amendment A1:2005 to EN 55012:2002 , [$ D- L m6 s(CISPR 12:2001/A1:2005)	Note 3 " \$ m, @0 k' p2 i& ]	01.03.2008
CENELEC	EN 55013:2001 7 M; T f2 g' {2 s8 {8 \|( {* ] Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement \|. {2 z d2 `1 R5 Z0 p(CISPR 13:2001 (Modified))	' Y' t: z1 e0 c/ jEN 55013:1990 + A12:1994 , B0 O! C# h$ e& b+ A13:1996 5 T, f6 ?- X; h6 T Y+ A14:1999 3 g' ^; G& ?& X1 _6 x/ s# jNote 2.1	/ D2 ~6 ^0 G' `* a, u1 W jDate expired % \& Y. g# K* _; d(01.09.2004)
	Amendment A1:2003 to EN 55013:2001 / N2 Z- j1 k2 C2 y. ^; j3 B (CISPR 13:2001/A1:2003)	Note 3 " l( V1 t0 }1 c( S! G	Date expired 9 m* e: `' ^: h8 c3 U7 ~ (01.04.2006)
	Amendment A2:2006 to EN 55013:2001 7 l; ]2 ]) i8 H$ _- s: d! S(CISPR 13:2001/A2:2006)	Note 3 - q# u4 l( M- a- ~" b! }# K	01.03.2009
CENELEC	EN 55014-1:2000 ! h1 v* r; r- Z6 L8 a7 HElectromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission 2 m4 { U# F' z. N7 S(CISPR 14-1:2000)	6 G$ u( h; x& E1 \0 \| EN 55014-1:1993 ' ]0 N& O E( Y. }8 z' O+ A1:1997 ( @8 T9 q6 ^4 \% O+ A2:1999 2 t5 I3 n y5 Q. M5 n Note 2.1	4 L' q. ~" g u# G Date expired ! P! k: l, S1 i) R1 O" A$ [. e(01.08.2003)
	Amendment A1:2001 to EN 55014-1:2000 9 f7 h2 z$ U# _8 y (CISPR 14-1:2000/A1:2001)	Note 3 - u# G* `8 P7 V	Date expired $ R6 h9 J( q/ V0 E! Z$ t (01.10.2004)
	Amendment A2:2002 to EN 55014-1:2000 ' O4 O+ t5 E8 N (CISPR 14-1:2000/A2:2002)	Note 3 ( _5 t) A3 m- W. ]	Date expired ! W% }1 Z1 p4 p(01.10.2005)
CENELEC	EN 55014-1:2006 / b% w; b0 y+ ~- k* q( v$ H/ VElectromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission 2 H/ w* S* ]- A, \* f(CISPR 14-1:2005)	# {4 }7 {- r) f* [ EN 55014-1:2000 5 O8 N1 Z0 P! v8 Kand its amendments 6 m6 S& D' N/ G3 z. \|2 R0 O H Note 2.1	3 \|' x* }# I- O5 P# V1 n6 A 01.09.2009
CENELEC	EN 55014-2:1997 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard " ]! @) S) e/ E5 Y6 o6 ~ e(CISPR 14-2:1997) 5 N4 N: M& I( f( d/ W. p	! e4 S: \|0 c% V& H1 d4 OEN 55104:1995 * ^ \|2 O/ U3 q. cNote 2.1	6 E5 M$ ]' ]( n" k Date expired 1 o/ ?1 F' l1 s( j d (01.01.2001)
	Amendment A1:2001 to EN 55014-2:1997 * d& h E. ~& T3 r8 h. L7 a+ ^(CISPR 14-2:1997/A1:2001)	Note 3 6 }3 x0 B9 J9 {	Date expired ' t8 s8 c! w2 f1 A' j4 z6 g (01.12.2004)
CENELEC	EN 55015:2000 , ]! p7 Y5 O8 d, O. g K! ?Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment ; F* i9 i6 M/ o1 ?) H(CISPR 15:2000)	8 K4 i; @; l4 X" N/ t. Y EN 55015:1996 9 d/ ^/ i9 X2 u4 u+ A1:1997 ( t/ \|1 \|5 L. \| + A2:1999 ' [. I+ o# J* b7 ?3 n- tNote 2.1	. a( D4 h! P1 h4 q) i) BDate expired 6 @; ?! @+ ^1 n7 \ l (01.08.2003)
	Amendment A1:2001 to EN 55015:2000 r: u8 P5 x& y6 j; x(CISPR 15:2000/A1:2001)	Note 3 + l/ p- n" _2 C: _: }6 S7 ]3 H	Date expired ! o$ R8 ]5 \|+ X% i/ }. H( o (01.12.2004)
	Amendment A2:2002 to EN 55015:2000 $ [8 k. `- G; f (CISPR 15:2000/A2:2002)	Note 3 ) V( b4 J3 D& Q: a* H2 \|	Date expired 2 `4 r n/ q. W3 ^* v) \- _ (01.10.2005)
CENELEC	EN 55015:2006 # u5 q/ P4 {" N Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment # u. b1 B* \|& b$ d (CISPR 15:2005)	; j8 Z* Y7 O0 D& q' p EN 55015:2000 + z% G& F7 t2 pand its amendments ( Y/ e9 ?: P! I( XNote 2.1	6 C/ ]7 \* F2 c 01.09.2009
CENELEC	EN 55020:2002 & U" w0 W7 s) m3 [$ \ NSound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement + H% @) U- @8 q- ~ (CISPR 20:2002)	, W0 H0 Y" ?$ d \( p) L0 C6 G EN 55020:1994 ! \|5 s' M& @5 n6 D; N1 U + A11:1996 ; ^& B' c* R6 d7 q + A12:1999 $ i; L. d& ] h" q+ A13:1999 ' h; A* B; {* \ + A14:1999 ( D2 J" d$ \! a K8 `4 k Note 2.1	& R4 F$ r b! x& JDate expired : n5 \2 `. T' ?+ K* o5 p(01.12.2006)
	Amendment A1:2003 to EN 55020:2002 6 k' R G' X4 S. Z (CISPR 20:2002/A1:2002)	Note 3 # b* [# U* E9 N! r	Date expired * L% B$ {# o7 W& w# ?/ j7 O (01.12.2006)
	Amendment A2:2005 to EN 55020:2002 & p: u1 f+ {$ t( f5 ` (CISPR 20:2002/A2:2004)	Note 3 3 t' K. X$ j w2 U- z: k	01.02.2008
CENELEC	EN 55020:2007 " [, h/ ]2 h& s Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement 8 c7 C0 \8 ?- l, @8 X C$ B$ y (CISPR 20:2006)	2 M2 D3 X7 u( [ EN 55020:2002 6 z9 b+ [1 s' b8 {) F7 r9 S Fand its amendments 0 l, ?7 t! m3 p7 \" H7 PNote 2.1	6 G9 Y) o, k" y) I4 a 01.12.2009
CENELEC	EN 55022:1998 & j5 C% w7 C; {8 ^& U# r: Q1 `8 ] Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement ) m; D3 c. S$ H9 X, B, L% @(CISPR 22:1997 (Modified))	# b# c0 t* p6 i- \$ R' Y9 LEN 55022:1994 + X+ }* \|: w( r, _! ^4 K + A1:1995 % d9 b9 D! [: v: C: y8 {: b! @ + A2:1997 ! m2 y# R7 V7 w4 w Note 2.1	}3 A) a ] X' j% kDate expired * Q0 z0 r7 k5 g* c0 v(01.08.2007)
	Amendment A1:2000 to EN 55022:1998 6 E( [- A* j1 P, Q! N. Z(CISPR 22:1997/A1:2000)	Note 3 / {$ z& p0 i! I. Y/ Z {" ]# F	01.10.2009
	Amendment A2:2003 to EN 55022:1998 + b( [4 K4 W5 h8 n. r, h. Q* i g (CISPR 22:1997/A2:2002)	Note 3 ' X$ A, u) t1 y- _	01.10.2009
CENELEC	EN 55022:2006 ( _% o( Q5 E; H" wInformation technology equipment - Radio disturbance characteristics - Limits and methods of measurement % ?7 \! `5 ]- b$ k9 U- M (CISPR 22:2005 (Modified))	2 _1 C8 m; H+ B7 b" Q5 i EN 55022:1998 / x$ h$ g' w [& ^# S8 M and its amendments 0 K% q+ F0 t! C5 a2 PNote 2.1	3 [+ c! l" `( ~2 m( I8 I5 I 01.10.2009
CENELEC	EN 55024:1998 $ v+ L$ B! y$ \( j) D4 dInformation technology equipment - Immunity characteristics - Limits and methods of measurement 1 v* L- X+ q3 {; z. Y(CISPR 24:1997 (Modified))	" g0 H$ {& w8 n2 s Relevant generic standard(s) 9 i& g- j$ N5 Q; i( nNote 2.3	" w- [, @, H; T- Z8 b! n; s [' G Date expired I9 e' P# Y' N: r$ d. S, O+ [(01.07.2001)
	Amendment A1:2001 to EN 55024:1998 ) M& o. c9 {8 R(CISPR 24:1997/A1:2001)	Note 3 & `' w- q3 w9 p% r! i	Date expired 0 O1 @" M9 R& ?$ z! I5 v' k7 i (01.10.2004)
	Amendment A2:2003 to EN 55024:1998 - @0 J9 I0 \|5 g9 [5 U) L(CISPR 24:1997/A2:2002)	Note 3 ; g! b+ L: _% i% Q* _6 V# P* F	Date expired * D- Y1 r; H5 i+ n (01.12.2005)
CENELEC	EN 55103-1:1996 1 A( W# S6 I5 y/ G Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 1: Emission 3 z6 Y& w$ u4 m {' h% A% z3 }9 w: Z7 s$ x	- x7 L2 k! R7 e; R5 n- _( \|Relevant generic standard(s) & C( a& ]! h2 `0 s( Y+ n' bNote 2.3	4 \: K* L# ]2 o Date expired $ L# i& R. y8 r(01.09.1999)
CENELEC	EN 55103-2:1996 2 U% Z/ b$ h* Q5 Y9 u7 d- Z0 R Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 2: Immunity ; K( \|: X& I2 Y$ _, x2 ^3 j	0 s6 Q4 P# n& }# k- g' N Relevant generic standard(s) & v8 S0 T( W; tNote 2.3	, _* Y2 l4 t" K' K$ oDate expired . V O0 h4 A- K1 X" X1 Q (01.09.1999)
CENELEC	EN 60204-31:1998 5 N6 a; ^6 r2 G. x q, N B2 w$ T Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems 7 a, z4 }6 G/ v" F6 b(IEC 60204-31:1996 (Modified))	7 }: b" Z0 m Q4 FRelevant generic standard(s) 4 ]3 r) `. k+ ]4 L/ F% \/ \|, ~1 K8 \|Note 2.3	3 w* H+ s' L5 J1 o- qDate expired 3 A4 P" q/ b; H. ` (01.06.2002)
CENELEC	EN 60439-1:1999 ' g* `0 z2 N! e! S7 e6 \|1 X2 ALow-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies + ]3 ?) c4 t+ `' z* \|& Y4 k0 v+ k(IEC 60439-1:1999)	4 F. F# b4 d3 e eEN 60439-1:1994 ! V: d: e7 x) q( O$ b4 m( c' N+ A11:1996 % ]3 }6 n4 O1 A3 I3 t9 t( b( w9 s/ SNote 2.1	$ H( c( [: U! R' ?+ P Date expired 2 d* a$ w9 @' T6 q! N (01.08.2002)
CENELEC	EN 60669-2-1:2000 * ?( j0 g7 C* f9 d# e, s' g/ z ySwitches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic switches ( a& v. y* L" u F" L. U; J: l3 n (IEC 60669-2-1:1996 (Modified) 2 b6 M: l+ S/ Q) x3 `: {$ M" H, ? + A1:1997 (Modified))	# ^9 V3 c* h' k2 [1 K# G EN 60669-2-1:1996 7 R7 f- y& ?! V1 F1 X O + A11:1997 0 B/ ^$ t& x/ m# E9 PNote 2.1	2 E, p% [7 d" p" B) \|7 a Date expired " q M3 q7 }8 n8 T8 e (01.10.2005)
	Amendment A2:2001 to EN 60669-2-1:2000 ' r" X. C( r4 d9 p7 ](IEC 60669-2-1:1996/A2:1999 (Modified))	Note 3 8 z9 _9 o0 g! B; T9 ~; x/ b8 U5 j	Date expired 1 V H) ^% @* b(01.10.2005)
CENELEC	EN 60669-2-1:2004 z' M$ i) H: Q; q y+ z( h) u1 \| Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic switches 3 B% ~ w* P( f" z& ?7 Q(IEC 60669-2-1:2002 (Modified))	2 \0 U; w" i& J- P% l OEN 60669-2-1:2000 & p/ v% @/ T, c5 C# H9 Kand its amendment / G' ~! d4 G" m3 b- w4 P! W Note 2.1	/ m3 V& l2 W6 h, \: g) `2 ^" M4 ?01.07.2009
CENELEC	EN 60669-2-2:1997 ' Q9 G+ i9 u, N1 P, m: a6 Z Switches for household and similar fixed electrical installations - Part 2: Particular requirements - Section 2: Electromagnetic remote-control switches (RCS) 7 m( O5 Z) T. g! e1 h(IEC 60669-2-2:1996)	$ w, G5 R2 W: \1 s U5 LRelevant generic standard(s) 1 n. h7 m0 {$ C1 rNote 2.3	! n$ K, z Y7 o2 rDate expired . s. V9 o- c5 E3 w (01.06.1999)
CENELEC	EN 60669-2-3:1997 : H) p! L1 w' n6 \|6 @2 Y) ? Switches for household and similar fixed electrical installations - Part 2-3: Particular requirements - Time-delay switches (TDS) 4 T" ?! u) k+ ]5 ^: x. v8 ]; h% ](IEC 60669-2-3:1997)	1 Z+ B3 E+ q1 Y EN 60669-2-3:1996 / A+ S/ p9 Q! S Note 2.1	2 p6 W, P3 E5 `8 V% s/ t( h Date expired : i% J& k/ z8 R: i (01.06.1999)
CENELEC	EN 60730-1:1995 % R0 O0 G$ Q' F0 {) uAutomatic electrical controls for household and similar use - Part 1: General requirements 9 X0 e! d+ Q! v" D7 \|7 m(IEC 60730-1:1993 (Modified))	3 s3 t, C" C! h' [* N' g: Y( J-	( q) W8 ?: \4 A) Y-
	Amendment A11:1996 to EN 60730-1:1995 2 ?% M, ?) y! \% c8 R	Relevant generic standard(s) ! X! ^9 R2 D, Z0 \|Note 2.3 ! \4 A0 M) Z# l0 ~5 T9 z	Date expired * U6 v/ u& y1 B: q(01.01.1998)
	Amendment A17:2000 to EN 60730-1:1995 + `7 E% Z% q) D0 R4 W5 A9 p3 I. R	Note 3 4 Q0 t1 \8 @, F6 ?0 O; H	Date expired : g7 P# r! L5 n, J I- K (01.10.2002)
CENELEC	EN 60730-1:2000 % L4 R7 R0 t% E& V% SAutomatic electrical controls for household and similar use - Part 1: General requirements % k" m% ^" K+ {9 @9 g (IEC 60730-1:1999 (Modified)) 9 ? ~; f: m% a) h0 [7 k( \3 Y) Q+ i2 Q7 \|3 N5 _. `2 K K Note 7	3 n" A# H I6 p) R$ b4 Z a EN 60730-1:1995 ; Z5 G0 w& n+ L0 \$ q+ ~and its amendments	5 _" G$ ~9 P. K6 R3 z-
	Amendment A1:2004 to EN 60730-1:2000 5 I2 t; O% n; V4 S2 \7 [5 P(IEC 60730-1:1999/A1:2003 (Modified))	Note 3 ! G9 T1 N. T3 J: ^	-
CENELEC	EN 60730-2-5:1995 & h! Z2 x# c( W9 n Automatic electrical controls for household and similar use - Part 2: Particular requirements for automatic electrical burner control systems " J7 l) \|+ c- R% o' i+ s1 b (IEC 60730-2-5:1993 (Modified))	! o2 K9 A3 ~, V- m/ \/ G0 O EN 60730-1:1995 $ S) C+ Y2 \$ `! Land its amendments ) Q/ J7 L) J) g, }6 S/ v& V. o Note 2.3	) W* d) ^! W" }2 L3 iDate expired R. B0 x% q8 y6 _(15.12.2000)
CENELEC	EN 60730-2-5:2002 ; a ?+ ~( g* g Automatic electrical controls for household and similar use - Part 2-5: Particular requirements for automatic electrical burner control systems & z- Y# a }0 l8 J (IEC 60730-2-5:2000 (Modified))	3 B. r) u" A, [/ z! m; [+ t2 ?, }-	- i$ ?1 Q0 Y1 r. I9 f$ z1 d-
	Amendment A1:2004 to EN 60730-2-5:2002 ( _& v, ~9 c+ n' n$ Q {3 {(IEC 60730-2-5:2000/A1:2004 (Modified))	EN 60730-2-5:1995 ! {9 u( W1 ?5 u% i2 e" M* j" ^: u2 oNote 2.1 5 O, b) [# r3 S* a$ K8 A	01.12.2008
	Amendment A11:2005 to EN 60730-2-5:2002 / y' w; e0 t1 R2 n! @4 t! }, I	Note 3 % F6 j3 C8 x8 I1 C2 {	01.12.2008
CENELEC	EN 60730-2-6:1995 ) j4 I T7 u1 WAutomatic electrical controls for household and similar use - Part 2: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements , c( _3 \|% w8 \|8 o& c6 H* s& `(IEC 60730-2-6:1991 (Modified))	; n- P' v1 C& l% \|" T -	6 H; i0 O. S) K3 `9 }5 ^0 r& H' u' @ -
	Amendment A1:1997 to EN 60730-2-6:1995 . {" Z4 h& ~+ `& \% r8 u(IEC 60730-2-6:1991/A1:1994 (Modified))	EN 60730-1:1995 1 g2 S' a* ]6 L. ]4 S5 }# O- \and its amendments / ]' n% r+ g3 {5 s/ M8 c Note 2.3 : J: w' G) \|9 ?% B. [% F	Date expired + }# z( p7 a% R* J% d3 ?- V(15.12.2003)
CENELEC	EN 60730-2-7:1991 : Z5 I: Q3 {5 H2 _ Automatic electrical controls for household and similar use - Part 2: Particular requirements for timers and time switches , x9 H( _9 g: o- L1 D(IEC 60730-2-7:1990 (Modified))	! P1 q4 c1 V" T0 n4 t-	1 _5 q& d9 H4 b1 B$ N-
	Amendment A1:1997 to EN 60730-2-7:1991 (IEC 60730-2-7:1990/A1:1994 (Modified))	EN 60730-1:1995 & o' h' X9 u0 Yand its amendments 1 z N# C4 l7 A5 R9 \|( W @Note 2.3 # F ~' c" D: k* J- R! ~	Date expired * T6 o1 a& M2 X# C(01.01.2004)
CENELEC	EN 60730-2-8:1995 % u9 z, i* ~7 y Automatic electrical controls for household and similar use - Part 2: Particular requirements for electrically operated water valves, including mechanical requirements 9 D' ]) f8 `' y, G(IEC 60730-2-8:1992 (Modified))	. h- ~1 _1 N% k4 q, v3 Z! Y8 J-	/ s" n! S9 s' W' N, M* x -
	Amendment A1:1997 to EN 60730-2-8:1995 . @6 \|& c+ P1 A$ T8 B5 `) A (IEC 60730-2-8:1992/A1:1994 (Modified))	EN 60730-1:1995 ( W" n5 c' ^' z" W7 F and its amendments # v o# ]8 X& _5 W$ A: W( Z Note 2.3 0 A) F, k: W% P2 _% j! z( h	Date expired 1 [3 u$ j$ s5 k) S/ @% y' B4 D& \(01.01.2004)
	> Amendment A2:1997 to EN 60730-2-8:1995 & ^( p1 L) Z. n1 o+ x0 c& q (IEC 60730-2-8:1992/A2:1997)	Note 3 " Z& [; x9 l" s	Date expired 8 A+ k, ]% x& {(01.01.2004)
CENELEC	EN 60730-2-8:2002 4 J9 m. F8 P- r1 i8 g, {Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements s; v, ^( s/ g' } e( ]# R8 Z (IEC 60730-2-8:2000 (Modified))	' a% `8 _- c8 _3 L% B, fEN 60730-2-8:1995 : Z, N, n/ _ j and its amendments ( D* \|/ A2 `. {; R0 [ Note 2.1	1 \|. K6 c8 G9 E+ \|0 o. ~ 01.12.2008
	Amendment A1:2003 to EN 60730-2-8:2002 $ x5 ?$ B: X5 p% [9 s+ u# v8 P2 x (IEC 60730-2-8:2000/A1:2002 (Modified))	Note 3 - s/ Q: I/ \|4 p2 T6 l! i	01.12.2008
CENELEC	EN 60730-2-9:1995 2 W7 O9 P& l0 D! z$ fAutomatic electrical controls for household and similar use - Part 2: Particular requirements for temperature sensing controls 6 k1 y# K' e. s(IEC 60730-2-9:1992 (Modified))	, ]' A- e* c& @0 U7 q-	$ C2 ?$ ^" S. @+ e2 y-
	Amendment A1:1996 to EN 60730-2-9:1995 * ~% ?' \3 k2 {7 \|! W (IEC 60730-2-9:1992/A1:1994 (Modified))	EN 60730-1:1995 6 O i2 \& {9 _8 W. z7 e/ e2 rand its amendments & c8 b! Q4 u. E6 C* P5 p- k6 J7 b' wNote 2.3 * n& \1 i! }3 h( C' S; c	Date expired 6 c/ @4 L% W2 ?/ D% n0 b( \|(01.01.2004)
	Amendment A2:1997 to EN 60730-2-9:1995 2 \' u2 @$ F X9 x5 D9 h" N(IEC 60730-2-9:1992/A2:1994 (Modified))	Note 3 1 `6 b+ [* G& C, \' Q! m8 `9 [1 z	Date expired ! S& I& M: M* ]# K$ o7 @(01.01.2004)
CENELEC	EN 60730-2-9:2002 6 V& [, w& r/ ` Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls 5 W2 s- f" i2 E* u! ~1 o4 ?) d, D+ ` (IEC 60730-2-9:2000 (Modified))	. c `: H( f# @+ V' z EN 60730-2-9:1995 ; k2 I: Q$ H( ^/ i& u and its amendments " O0 R& ]: v% Y7 G2 [# kNote 2.1	; h* S8 B" i s0 b01.12.2008
	Amendment A2:2005 to EN 60730-2-9:2002 ! z, x# I- P! I, P- X1 j(IEC 60730-2-9:2000/A2:2004 (Modified))	Note 3 $ T) b+ J7 ~6 r- _& h( A9 g' I* T	01.12.2007
	Amendment A1:2003 to EN 60730-2-9:2002 ; ?' D3 Z! v$ ^) M% y$ l (IEC 60730-2-9:2000/A1:2002 (Modified))	Note 3 ! p+ K! Q+ P& ^- ~; d$ x/ n	01.12.2008
CENELEC	EN 60730-2-11:1993 # C; Z4 S3 v) q- b' C D% q Automatic electrical controls for household and similar use - Part 2-11: Particular requirements for energy regulators % g+ {8 H) G) J- \|, f7 @(IEC 60730-2-11:1993)	: s$ r! T2 u+ e3 s -	4 W8 ~0 e" J C7 \| -
	Amendment A1:1997 to EN 60730-2-11:1993 3 i& G* c3 o5 Z L7 L2 w9 C2 R- Q(IEC 60730-2-11:1993/A1:1994 (Modified))	EN 60730-1:1995 5 E% z: x p7 J v+ ^# Yand its amendments / c5 s$ o) y5 \|+ e Note 2.3 - F* P" D4 P) m* P' ]5 p4 i	Date expired 6 X; @+ q+ F0 h4 {6 T(01.07.2000)
	Amendment A11:2005 to EN 60730-2-11:1993 4 S/ u& L% J- \2 E4 b' x% \|* E1 b	Note 3 2 I5 }5 @9 m# E3 ^& s: t5 N	01.03.2009
CENELEC	EN 60730-2-13:1998 ; r9 d9 Q3 z/ r/ SAutomatic electrical controls for household and similar use - Part 2-13: Particular requirements for humidity sensing controls 7 Z8 K: A" T9 S6 k& W5 ]0 D: ](IEC 60730-2-13:1995 (Modified))	/ v, [3 X* V W3 U: Q! N0 JEN 60730-1:1995 0 S: Z* [5 m8 V4 f# Eand its amendments # O( _: p- [* G+ w0 s Note 2.3	9 c0 p7 `! q8 o& ]* O$ { Date expired . `+ k4 {! d8 F. ~% \ (01.08.2001)
	Amendment A11:2005 to EN 60730-2-13:1998 % Y7 ]! h" n& u( F! f' e( Q0 u	Note 3 , `0 x& @0 r% V# r. A: d G3 [8 F- @	01.02.2009
CENELEC	EN 60730-2-14:1997 $ r# j' x3 c$ p% IAutomatic electrical controls for household and similar use - Part 2-14: Particular requirements for electric actuators . M5 X8 }5 i1 @5 F: ]2 x (IEC 60730-2-14:1995 (Modified))	6 Z O: d# X/ g# u EN 60730-1:1995 ( ?9 [) C) e+ \|; W4 U, }and its amendments 3 P& N! N- O* \|4 {5 t Note 2.3	$ ~* n* C' h. E. p; v# W% p Date expired ) K; P6 k/ @2 K$ m9 \(01.06.2004)
	Amendment A1:2001 to EN 60730-2-14:1997 1 c. K& A# T3 s4 F$ {1 s- H (IEC 60730-2-14:1995/A1:2001)	Note 3 2 Z# [, g+ T- l+ R	01.07.2008
CENELEC	EN 60730-2-18:1999 $ h) E! {6 s3 s/ h6 K/ rAutomatic electrical controls for household and similar use - Part 2-18: Particular requirements for automatic electrical water and air flow sensing controls, including mechanical requirements 8 Q& [. Y( v. [7 S1 Q9 J (IEC 60730-2-18:1997 (Modified))	& e" n9 g _9 [EN 60730-1:1995 D$ Z( \|. T# M% M# }% @8 pand its amendments 9 t& E7 u8 h& C! _2 nNote 2.3	* M% R8 Z4 G( g2 b+ P& I* \/ R Date expired ( ~" Z* W7 W( r) N- n2 {! Q: N& H4 ? (01.04.2002)
CENELEC	EN 60870-2-1:1996 # b+ ~& a' P3 m, c' ?. [3 oTelecontrol equipment and systems - Part 2: Operating conditions - Section 1: Power supply and electromagnetic compatibility 2 i0 H n2 c" ]' @: j8 A(IEC 60870-2-1:1995)	" z, {! Q1 {' B) W6 X5 ^ Relevant generic standard(s) 7 m$ n9 H/ I2 v9 [# K Note 2.3	( D( K N3 l( y# s, r) q c Date expired ( B. f9 L- W' @) A (01.09.1996)
CENELEC	EN 60945:2002 5 H0 ]( H# ^- f9 x( ^# d* PMaritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results & \1 n; g' J# X. u8 y (IEC 60945:2002)	" ?: l" B8 d, y OEN 60945:1997 . {. Q; a2 \|8 C& SNote 2.1	F( q5 \/ d& L# t. Q1 E6 i' K# l* bDate expired 7 S8 b% e2 ?2 ?# R1 A) B (01.10.2005)
CENELEC	EN 60947-1:2004 8 ~. w; h* M3 a( Y) O l3 j* \|/ RLow-voltage switchgear and controlgear - Part 1: General rules 2 A8 N& t3 t9 d, D9 r (IEC 60947-1:2004) " r* V' e5 Z, c" h3 m$ T : c8 _2 h' o& h Note 6	* x5 D: D/ J! L' \| EN 60947-1:1999 - _ B, u0 P; i: f, \* K+ A2:2001 + L0 U. i+ D" @) {2 o. B# SNote 2.1	- C" q7 T D0 y6 ^( T Date expired : x7 H M r P4 i" n(01.04.2007)
CENELEC	EN 60947-2:2003 ( p6 u& d& e- s$ {0 p0 ` Low-voltage switchgear and controlgear - Part 2: Circuit-breakers / C3 S! X: v, ]; b' @8 j! L2 P: [(IEC 60947-2:2003)	EN 60947-2:1996 " t( N! R/ v1 ^2 h' ? + A1:1997 # i2 e. m& l- k- G* h4 F + A2:2001 ( d( B4 v* k) `9 E Note 2.1	: D# N5 g6 \|* q$ k" r7 bDate expired 6 C- R) W( w+ C (01.06.2006)
CENELEC	EN 60947-2:2006 / S6 q: _7 K- l6 z0 x1 b Low-voltage switchgear and controlgear - Part 2: Circuit-breakers # S2 i0 A( `3 i- y1 j- {- Q0 c(IEC 60947-2:2006)	2 J+ y" x' n7 a4 W, d0 l EN 60947-2:2003	# N3 y+ Z' \' ^3 \6 K Y, a 01.07.2009
CENELEC	EN 60947-3:1999 ) w) `! U3 t Q$ i% V( { Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units 4 m b' n. ^$ ^: D) l9 C* @" \| (IEC 60947-3:1999)	/ f0 Q/ ^8 Q) z2 ?6 i) I0 Y$ vEN 60947-3:1992 ' K3 m& z* ~" H# {, `) S# A + A1:1995 . }3 g# F. N6 UNote 2.1	\0 W. e V8 p. TDate expired 5 N# }/ C$ s- r8 r& S; s. J9 V (01.01.2002)
	Amendment A1:2001 to EN 60947-3:1999 & C9 e) x( p$ q% S# {(IEC 60947-3:1999/A1:2001)	Note 3 8 \|6 g4 e$ Q& t3 z' R	Date expired , k' p' t+ U* K" c! p; N8 Z( u(01.03.2004)
CENELEC	EN 60947-4-1:2001 7 h3 {$ X7 @+ w6 d& u S+ g( R7 l) eLow-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters 0 k6 C) J# L5 b; _6 V(IEC 60947-4-1:2000)	/ \|* U. e* x! w- j0 l-	Y( Y; G* l# n8 S) _ -
	Amendment A1:2002 to EN 60947-4-1:2001 ( Q% u! R; K5 N# `9 r. d6 h(IEC 60947-4-1:2000/A1:2002)	EN 60947-4-1 " O1 f& d1 Q1 l2 w7 K, T7 {$ pand its amendments ) ] d+ S1 [3 c; K- n Note 2.1 - d( _" ?- ~4 ~: p2 V	Date expired 7 a" S+ J4 q% Z1 U3 m (01.10.2005)
	Amendment A2:2005 to EN 60947-4-1:2001 9 h& y8 }/ _3 h$ @' z# M! g(IEC 60947-4-1:2000/A2:2005)	Note 3 : G& ?7 s/ I2 H4 L7 f9 D' i- ]	01.07.2008
CENELEC	EN 60947-4-2:2000 W# E3 i6 P8 jLow-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters s& ^) a8 t- R- D+ v( } (IEC 60947-4-2:1999)	/ y) p' p" H+ ^ EN 60947-4-2:1996 & e8 ^5 o/ a5 s + A2:1998 % L- J& d( z# [! V1 u5 {5 ? Note 2.1	0 y3 N3 G$ Y3 L0 x+ U+ CDate expired . A& P+ i9 l( T- Q0 {; V3 U4 P (01.12.2002)
	Amendment A1:2002 to EN 60947-4-2:2000 2 ?8 F3 X& J% U1 ^: D7 ^ (IEC 60947-4-2:1999/A1:2001)	Note 3 7 z0 c6 B0 F; a' Y! u: e	Date expired " J W: T+ n6 F& \|8 [1 Y1 M3 Z. R (01.03.2005)
	Amendment A2:2006 to EN 60947-4-2:2000 6 g! R E; D0 w& K(IEC 60947-4-2:1999/A2:2006)	Note 3 $ U& G. v6 @+ d, u	01.12.2009
CENELEC	EN 60947-4-3:2000 * C9 ^4 S/ u- e' X Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads / P" p8 ^8 T, Z/ V" s$ \% j! D9 G1 C0 n (IEC 60947-4-3:1999)	$ z) \' k- W4 j0 w2 `( H& j4 j# TRelevant generic standard(s) ) x# A% h& ^) M/ T* d6 q& W, }Note 2.3	5 H5 ?# i5 t# g8 q, q6 F9 ] Date expired 5 z- g8 @ f' W8 }4 j; n (01.12.2002)
	Amendment A1:2006 to EN 60947-4-3:2000 . O2 V$ ]6 M; [$ y& J! G(IEC 60947-4-3:1999/A1:2006)	Note 3 & V- p& U3 l. i# s	01.11.2009
CENELEC	EN 60947-5-1:2004 $ O5 E7 \2 _9 U Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices . U; ^/ G+ T( G2 R# M(IEC 60947-5-1:2003)	; u4 R0 s$ V) uEN 60947-5-1:1997 5 \7 H( e" f. ~+ v: T+ A12:1999 + R( x: Z: w* @, B9 [ Note 2.1	% _- p# X$ h6 Q4 V2 QDate expired 8 Q) N4 W- Z" u- ~ m3 L (01.05.2007)
CENELEC	EN 60947-5-2:1998 ^6 C7 G- F+ T- j, y% i Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches ' B: @/ o! {, j# `7 M(IEC 60947-5-2:1997 (Modified))	- I) p: B! t$ c" v EN 60947-5-2:1997 ; M" v9 E# Q; Q Note 2.1	- ~; f$ Q6 R; u$ V9 e: E$ R Date expired ; S2 i. t$ i& g* I3 ?. C (01.10.2001)
	Amendment A2:2004 to EN 60947-5-2:1998 - o5 r! s+ Y9 W; F8 \|5 P (IEC 60947-5-2:1997/A2:2003)	Note 3 & ?1 S1 u1 h* n( \|, K	Date expired % ?( V$ I$ B) D( z (01.02.2007)
CENELEC	EN 60947-5-3:1999 0 o) M0 e( K* ` Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDF) + U3 F6 H7 x5 P2 Y+ o (IEC 60947-5-3:1999)	0 U8 U, B+ b$ u$ C# F Relevant generic standard(s) 3 h" M" n! s ?6 o& ENote 2.3	" M* m) n: O0 }, r0 QDate expired & Q* ~- Q6 h& O9 H& D& v6 ] (01.05.2002)
	Amendment A1:2005 to EN 60947-5-3:1999 $ j! ]1 q, i* C/ \|(IEC 60947-5-3:1999/A1:2005)	Note 3 3 I, v# v$ c% S	01.03.2008
CENELEC	EN 60947-5-6:2000 : o: U9 ^2 Q$ k7 ]4 }, A. B+ i Low-voltage switchgear and controlgear - Part 5-6: Control circuit devices and switching elements - DC interface for proximity sensors and switching amplifiers (NAMUR) # w5 R' S' \( j; g" x& x/ n(IEC 60947-5-6:1999)	9 ?3 e' e$ ^! m" n EN 50227:1997 : v: w6 n# M$ o8 ^+ c Note 2.1	( P \. @/ S: {; [- cDate expired # r! w8 P- s6 A- r, v y(01.01.2003)
CENELEC	EN 60947-5-7:2003 0 l' O: h b, [6 A1 FLow-voltage switchgear and controlgear - Part 5-7: Control circuit devices and switching elements - Requirements for proximity devices with analogue output 4 m @0 a: @& ~, q0 ~(IEC 60947-5-7:2003)	+ ~0 O- d! T; ]* E2 R" P q# M Relevant generic standard(s) ; L1 m2 \- A7 i, o$ ^ TNote 2.3	5 q( ?/ O; L* G! j! n Date expired 9 E" E9 P% h9 {( {5 @: Q- ` (01.09.2006)
CENELEC	EN 60947-6-1:1991 8 Q& E' X+ W F8 W+ sLow-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Automatic transfer switching equipment * ?# R& K1 k" H1 b, C(IEC 60947-6-1:1989)	$ @; ? n k2 @% c1 W1 f: ~, A Relevant generic standard(s) & S$ E+ F" a% I/ Q8 e7 T0 h2 KNote 2.3	/ D5 v- A) A0 T0 A" V3 `; nDate expired 7 w# `2 G. [0 a1 j! z* ^5 d% x& T2 t (01.10.1997)
	Amendment A2:1997 to EN 60947-6-1:1991 4 T% d: E2 P3 e(IEC 60947-6-1:1989/A2:1997)	EN 60947-6-1:1991/A11:1997 * i P( Z( P' e n Note 3 7 b/ L- T7 s& b* k; K	Date expired & [' \|/ q \|1 n6 _ (01.07.1998)
CENELEC	EN 60947-6-1:2005 * J9 X% s9 \|- F4 q* k. H/ \| Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer switching equipment 7 q) \|# d1 v& Q# w! @8 }7 M/ J& B/ C(IEC 60947-6-1:2005)	9 E6 E0 X% P V) W EN 60947-6-1:1991 + y L9 ]& [( T& M: I$ a- m and its amendments 4 w. X/ `5 @$ B. _( _/ S, P Note 2.1	1 f" z; z7 ^% M7 l# A* G* C 01.10.2008
CENELEC	EN 60947-6-2:2003 * {; u0 R8 g9 @2 c7 R; `: G Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS) : J4 g) Z: O' C# V! Q0 c(IEC 60947-6-2:2002)	4 R) U. b* `; \& C' X; ^9 B$ @' K EN 60947-6-2:1993 ) s9 Q: F) \|7 S: l- T6 h+ A1:1997 ' v7 \|7 V+ g( c4 m9 f- NNote 2.1	, B9 X- p0 y. K( r: Z0 V8 ?- j; O7 f+ a+ k Date expired * o. D4 d7 ]& N3 \|2 V* N/ c: l (01.09.2005)
CENELEC	EN 60947-8:2003 9 E6 h) k Z0 k6 y: g$ ]3 tLow-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines % P" m! h' p" \|* p(IEC 60947-8:2003)	/ c, H; K2 J. f9 ` x. p9 U Relevant generic standard(s) 7 X4 x& X& ^$ H! _3 gNote 2.3	& S8 L7 `' a+ D! i! sDate expired ! G/ B0 M1 u, V( O& C: \|2 \(01.07.2006)
	Amendment A1:2006 to EN 60947-8:2003 " t9 ]" `; Z) J, J/ E0 a9 L (IEC 60947-8:2003/A1:2006)	Note 3 9 \|3 c! [6 I1 k: b+ ?# D9 h	01.10.2009
CENELEC	EN 60974-10:2003 . \|0 x% p( C# F$ h* `Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements ' [% w3 ]" z5 q0 K" u (IEC 60974-10:2002 (Modified))	" Z u; b, m$ e5 T( z, p& A! Q' h EN 50199:1995 $ V; R" Q9 N( ^% m% n+ A Note 2.1	R1 r# V6 O* i, EDate expired - L+ L0 Y* P; L( M. E9 G (01.03.2006)
CENELEC	EN 61000-3-2:2000 8 F& G- E7 J8 h/ L" G u* g! u) TElectromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current up to and including 16 A per phase) ' `8 K6 P" J9 y3 y(IEC 61000-3-2:2000 (Modified))	: A( E; Q. y0 e3 ~8 a0 j EN 61000-3-2:1995 6 D' V Q; ?( Y& d' W + A1:1998 ; Q `" e' v3 L+ g" D9 b+ A2:1998 }& @( _" Z! S, R! I + A14:2000 o+ W6 A: n- f+ ?" ONote 2.1	& Z9 r, L; X; J }( [- S) jDate expired ! z, N3 {5 P. \|& o2 X! x(01.01.2004)
	Amendment A2:2005 to EN 61000-3-2:2000 2 K0 k1 j. d0 u E( o: l (IEC 61000-3-2:2000/A1:2001 ' _& L3 \6 g& V* q* l7 {+ IEC 61000-3-2:2000/A2:2004)	Note 3 6 C9 v' t) S' a% p+ q6 C6 I	01.01.2008
CENELEC	EN 61000-3-2:2006 7 n; ]: \. X7 y) B Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase) , K; P$ x" m5 E& u6 P5 U (IEC 61000-3-2:2005)	* D ?' G8 D& U# s/ g fEN 61000-3-2:2000 & u2 A) x; q& y- }5 \# D/ `and its amendment 3 h0 ~' K0 N; O q0 n: P& E; b Note 2.1	# r" n8 I# p- g) h0 `: I01.02.2009
CENELEC	EN 61000-3-3:1995 5 ?8 I' W) C/ i Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection " ~/ G% H. X: c0 z6 C! D' i(IEC 61000-3-3:1994)	9 l2 u3 ]3 W# `) b7 YEN 60555-3:1987 0 f# H1 G( p1 k# N+ H + A1:1991 / c% x, o& ]( y2 A) b2 XNote 2.2	2 e/ e9 x/ k& X: [1 ^. t Date expired 0 U) A1 c$ v" Z4 W& h+ k (01.01.2001)
	Amendment A1:2001 to EN 61000-3-3:1995 7 h( p5 q7 ^1 R$ c2 E- d/ \|# ~- p (IEC 61000-3-3:1994/A1:2001)	Note 3 & y2 Y5 ^) r' C5 E _4 L# W	Date expired , T4 g W. V+ J) \|3 ]9 h8 e3 M (01.05.2004)
	Amendment A2:2005 to EN 61000-3-3:1995 : O$ }* u8 A' D1 P" [ (IEC 61000-3-3:1994/A2:2005)	Note 3 % j5 ]& S: W ?+ _7 p	01.09.2008
CENELEC	EN 61000-3-11:2000 " b5 Z' s& B7 C4 O4 IElectromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current <= 75 A and subject to conditional connection ( h8 K F: C3 O, D- Q/ s2 Y(IEC 61000-3-11:2000)	6 L& N% p6 _& L- S3 B1 f) iRelevant generic standard(s) + a4 u M0 ^( G. l) D7 j: E' X: xNote 2.3	) k8 m% M4 S/ B6 {" G, x d4 o Date expired ) X: f& P1 J! R2 \|(01.11.2003)
CENELEC	EN 61000-3-12:2005 Q1 ^6 U2 Y. F% S& Y) [ Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and <= 75 A per phase , ]/ b8 \|* Y& n O/ g (IEC 61000-3-12:2004)	2 y4 Y# S! s' ]' I! ORelevant generic standard(s) ; B1 ?# u* N% Z( CNote 2.3	! V) l8 _2 {8 \|1 f01.02.2008
CENELEC	EN 61000-6-1:2001 : ]( J& a8 ~1 ^0 U& K: z5 F; y5 A8 ]Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments 6 N* x4 i. Y- h0 k (IEC 61000-6-1:1997 (Modified))	& V) E& U# s+ O! o" o. d EN 50082-1:1997 , }+ J* I7 _, f& R8 R Note 2.1	0 w$ M! r' J1 ~% T# Y! ~& Z) K# y2 DDate expired ! \| y! T) U! u. {0 N" r; L (01.07.2004)
CENELEC	EN 61000-6-1:2007 . }" X0 B4 a' q* T( \|Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments % ?$ k" J, @; t% M: ]5 L) a( p9 k (IEC 61000-6-1:2005)	: i% d j, J& N9 `+ l& m8 {+ `8 @7 l EN 61000-6-1:2001 4 {( b: l3 ?! S }9 D0 b Note 2.1	/ h/ W1 x! C, x0 a1 N' k4 b 01.12.2009
CENELEC	EN 61000-6-2:2001 2 Y5 I# A; x% ^6 K; C! R- S- u6 O Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments ; F: K5 b1 T6 n) U/ U* l (IEC 61000-6-2:1999 (Modified))	- A, d& w% @: PEN 61000-6-2:1999 / b5 U. ]- a' L( d7 {# a- Q5 I# @2 uNote 2.1	7 Y$ a- \|# ^( A, \|# [. A! p Date expired $ _4 w! o3 d2 _(01.07.2004)
CENELEC	EN 61000-6-2:2005 % l$ q5 _8 I) W+ hElectromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments + ^0 @, L6 c+ K j8 \3 C7 O* V(IEC 61000-6-2:2005)	0 M V4 _, `+ S/ d0 r9 v EN 61000-6-2:2001 ! I3 x5 R' l8 u- A+ _+ [Note 2.1	5 w% y& I v4 t% H( g! o& Z! W01.06.2008
CENELEC	EN 61000-6-3:2001 3 }, C' z( u+ SElectromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments ) U& M' c6 C3 u1 e* h* C9 x4 m) m(CISPR/IEC 61000-6-3:1996 (Modified))	- A* e& _% B" T' B EN 50081-1:1992 " _. \& D+ x _1 @Note 2.1	+ \2 ^" J# b% h: `# jDate expired ) G# ]$ I, U, G1 r2 t7 V$ u% V (01.07.2004)
	Amendment A11:2004 to EN 61000-6-3:2001 0 X3 X5 p4 H$ M L$ \|2 I	Note 3 3 {: t2 s D! {" w$ \|: W. @	Date expired 0 D0 d3 X. G4 m: p% U* R4 ]1 E(01.07.2007)
CENELEC	EN 61000-6-3:2007 ' m. ~; e+ @7 e$ F, n9 q$ [2 l Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments 5 M) l. l0 v1 a& P- ]0 T& G" J (IEC 61000-6-3:2006)	9 q2 ?! }5 i% q' f2 ] EN 61000-6-3:2001 0 ^7 ?# d* s- A& n Y' P. q* fand its amendment * D7 \|. i8 r9 m0 w: g/ d/ t6 TNote 2.1	4 k3 \|9 x. o8 ]5 u/ W 01.12.2009
CENELEC	EN 61000-6-4:2001 4 k! `1 y- Q- a. H; J0 BElectromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments 6 P) f. l3 p" s(IEC 61000-6-4:1997 (Modified))	. A# O2 E0 T5 t$ Y5 G EN 50081-2:1993 ; f0 T2 i* a; F- t X( M Note 2.1	8 b0 o0 o d( a/ D; M, m- h& H Date expired 4 ^# U; G5 `- \|% j! W(01.07.2004)
CENELEC	EN 61000-6-4:2007 ( y R0 l1 Z; uElectromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments 2 u3 X2 Q. K2 h% v t, R (IEC 61000-6-4:2006)	" ?2 p' \( f/ S- u* oEN 61000-6-4:2001 . i" U0 H- f; Z' _' K% }Note 2.1	# t! @2 `: h2 E/ h/ P01.12.2009
CENELEC	EN 61008-1:1994 " \|+ _1 ^: [1 K5 t Electrical accessories - Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's) - Part 1: General rules 9 w% [2 ~; l7 V2 v2 n. C(IEC 61008-1:1990 (Modified) 9 b, E$ X! Z- o o + A1:1992 (Modified))	5 X: P+ F% _! H9 B! J0 e* Q0 P7 g -	6 d% R* n1 {. S/ l8 @* R -
	Amendment A2:1995 to EN 61008-1:1994 0 \|& T/ Q3 _8 E2 l (IEC 61008-1:1990/A2:1995)	Relevant generic standard(s) $ D( m3 C) P' I7 R* y3 k% eNote 2.3 % V2 @, d* O1 n0 E% u	Date expired 0 Q/ R% L4 _$ ]% ](01.07.2000)
	Amendment A14:1998 to EN 61008-1:1994 : Q3 G3 e: P9 [$ b, _/ I	Relevant generic standard(s) % Q9 V8 W" }& C. K R: ^- t Note 2.3 # y/ b" u8 j V7 x9 u1 t& b- I! f' ]	Date expired - i- G4 C# r5 S& u: ^8 y* ] (01.01.2001)
CENELEC	EN 61008-1:2004 / w: X9 e: [' i$ d5 m Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's) - Part 1: General rules 9 g6 j4 g1 ~" L; w1 T( \+ J& u. d2 \(IEC 61008-1:1996 (Modified) ! c( J0 S: K# \|7 C8 q( ~4 r! ]; Z + A1:2002 (Modified))	" P3 v* X2 q/ o9 P/ ~/ J/ J EN 61008-1:1994 ) a, ^, ^8 m% W. _and its amendments - V% u. ]0 {7 r/ R8 qNote 2.1	& I5 }: Q( D( A% g- X; g01.04.2009
CENELEC	EN 61009-1:1994 0 K9 ?1 K- f7 m5 g7 O( }' {! I: J( YElectrical accessories - Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) - Part 1: General rules / ]6 n# m" \|7 I, Y4 j+ C- A+ h6 E(IEC 61009-1:1991 (Modified))	' Y7 C) w, X8 M. S1 h& ]-	# U$ A M! t' ^- A* \-
	Amendment A1:1995 to EN 61009-1:1994 , H/ w2 j) ^* A* a(IEC 61009-1:1991/A1:1995)	Relevant generic standard(s) 8 P7 b( I1 t9 x5 ~) E; Y Note 2.3 & C5 U# k, \|$ G$ l* G `4 f	Date expired 6 B- F- K! J ^ H& a8 Y (01.07.2000)
	Amendment A14:1998 to EN 61009-1:1994 2 f1 } l: m* A- y' r% d# u) ]	Note 3 3 F' j9 g- K9 l0 z, o! V& }7 E$ T	Date expired n& v1 _3 l" ~; s$ S(01.01.2001)
CENELEC	EN 61009-1:2004 ; [2 W7 J( d1 t- Z/ I1 R2 u) q# y- x: O Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) - Part 1: General rules 1 q* \|/ A f( t) D# k( O (IEC 61009-1:1996 (Modified) " H8 C( F% W& Z9 s. b" e/ W# \|+ A1:2002 (Modified))	% G9 l- Q, S1 g3 X$ s EN 61009-1:1994 / U5 J. \& @' S% g& s2 e and its amendments * ]5 w' \|6 ` w$ z Note 2.1	" p& k2 e% p: I# r: z7 I4 B01.04.2009
CENELEC	EN 61131-2:2003 ( I4 j5 j6 X0 \2 g+ _Programmable controllers - Part 2: Equipment requirements and tests + g+ g8 j5 f# P) V# h1 Y9 I(IEC 61131-2:2003)	; a( ]) y1 P' G) q- S EN 61131-2:1994 " ? V7 e! Z0 x- a) N [, M' V+ A11:1996 5 y9 I' Y k! l& ]/ J+ A12:2000 * J5 e l- S! D0 `: a Note 2.1	. ~2 V$ y9 g& B' H1 V: S nDate expired $ j1 `. j) ~; I) V7 @& X( J: y(01.05.2006)
CENELEC	EN 61204-3:2000 6 t4 _) x! t, YLow voltage power supplies, d.c. output - Part 3: Electromagnetic compatibility (EMC) & I+ t) V; z$ ]9 f) u (IEC 61204-3:2000)	! R8 }/ E$ @* D2 h Relevant generic standard(s) $ O9 h$ V6 [1 w1 g& } Note 2.3	3 a- g& I% G& Q& U1 B Date expired ) w/ n4 Z, b3 y(01.11.2003)
CENELEC	EN 61326:1997 , f- p$ e$ h) g3 @* P Electrical equipment for measurement, control and laboratory use - EMC requirements : @$ x4 v. F5 b Y$ j: F2 S (IEC 61326:1997)	) w4 [5 @) z# t! e+ h0 Y0 ~ Relevant generic standard(s) 8 g% Z6 V4 ]. v Note 2.3	/ P* r8 _4 p3 e6 C1 h Date expired , L. [: d1 e2 H* E7 \, E (01.07.2001)
	Amendment A1:1998 to EN 61326:1997 , x# b6 m* G" s. O(IEC 61326:1997/A1:1998)	Note 3 * Q3 \|3 O+ m* p8 C3 L	Date expired ) n& s0 d* ?$ k7 Y; B6 y(01.07.2001)
	Amendment A2:2001 to EN 61326:1997 + G. y# q% G) G+ S (IEC 61326:1997/A2:2000)	Note 3 $ e/ ~, S9 C8 M- _- R( P	Date expired " \$ h3 M" \8 \" \|( v8 b* e& k; G(01.04.2004)
	Amendment A3:2003 to EN 61326:1997 ; u! c/ ] c5 {! _5 u! b5 Y! X! T& h (IEC 61326:2002 (Annexes E & F only) + IEC )	Note 3 7 r k9 l9 {) q- N G# K	Date expired 9 t+ R" E) S- ?1 N* C(01.10.2006)
CENELEC	EN 61326-1:2006 + u3 ?0 \|$ a; k3 }- e# m2 A2 \|) v* [ Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements # K. ? [# G; ?& B (IEC 61326-1:2005)	. z: ~4 l1 q" ^/ k6 Z EN 61326:1997 $ m) A4 W: X c/ Cand its amendments # A$ w( D( }5 } Note 2.3	2 y: C5 X4 k ~7 w 01.02.2009
CENELEC	EN 61326-2-1:2006 6 H! {; d( e5 O3 F& ?5 y: c5 nElectrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications $ `( ^) n3 J+ k$ R* @" I6 i(IEC 61326-2-1:2005)	9 O* C7 @) A6 b" ?) O2 i A! f7 R EN 61326:1997 . h7 i( I% M9 u3 X: X9 B9 Pand its amendments * I# F' }/ c6 U6 N Note 2.3	% y$ e/ c. A2 t5 U 01.02.2009
CENELEC	EN 61326-2-2:2006 " _( n9 f: _% ^) _0 VElectrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems , s# R# O; @$ F) Y: n! f8 o& `2 D3 v(IEC 61326-2-2:2005)	! D/ C* n) g$ X3 T; SEN 61326:1997 a1 E2 [7 X& L. P+ Z and its amendments \|3 R+ I% ^7 }6 \% } Note 2.3	* B2 l2 Y8 Z$ j* w! {% a [- r 01.02.2009
CENELEC	EN 61326-2-3:2006 0 R8 v& t" N! s B Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning - F9 R* c& E+ m- m (IEC 61326-2-3:2006)	. A# `& m+ J! A/ f/ k8 ^; a3 o EN 61326:1997 9 Y \|+ ?0 R2 U& O9 G5 } and its amendments $ W) Z+ w" ~7 WNote 2.3	* E/ x, p; @1 s) ]/ z 01.08.2009
CENELEC	EN 61326-2-4:2006 + t! E, o( n5 Y3 V% S8 r( l" m! y Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 5 n7 E% \|1 H$ X2 E! j, [! B (IEC 61326-2-4:2006)	1 j: j- T+ ]% z4 J" B( v1 F EN 61326:1997 6 X7 [6 T& q H3 }0 i$ B and its amendments $ F4 L9 }7 C0 n8 {% ^/ ^Note 2.3	/ e# z C0 \! v* @' K; ]) c 01.11.2009
CENELEC	EN 61326-2-5:2006 9 Y4 x0 k6 @. x* x/ b Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with interfaces according to IEC 61784-1, CP 3/2 " I$ s8 ]0 b/ i+ A& o (IEC 61326-2-5:2006)	% u* C. e5 ?5 x4 N8 N. [ EN 61326:1997 8 r+ X7 z3 g' k2 H; a6 Aand its amendments ; q# _/ R- M- }# l+ y Note 2.3	8 f1 q2 L) Q% T; x8 Q6 n 01.09.2009
CENELEC	EN 61543:1995 ; b6 S* A6 M! C& g1 QResidual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility 1 J' w z- Y$ Z (IEC 61543:1995)	* A6 t3 v4 @( {1 _0 K Relevant generic standard(s) 4 C9 d: e, ?$ W3 W2 L, C4 A Note 2.3	9 Y* o) b8 _3 \) }9 `Date expired ' G# W+ K) T/ p% j (04.07.1998)
	Amendment A11:2003 to EN 61543:1995 + \|, L. M1 q( b6 H$ H9 `8 ^	Note 3 + g7 i5 m/ q$ i, m7 W6 q4 k/ u& ]! W	Date expired 5 e; c, v# f$ u6 e (01.03.2007)
	Amendment A12:2005 to EN 61543:1995 8 F# {6 b* s& L. a) v# x6 M	Note 3 3 G5 k! G" I' e" k) d( c9 @	01.03.2008
	Amendment A2:2006 to EN 61543:1995 # y& F6 p. b& q(IEC 61543:1995/A2:2005)	Note 3 ' D/ O% x _# h* e+ F) H" f	01.12.2008
CENELEC	EN 61547:1995 ' o4 Y1 \! v& p Equipment for general lighting purposes - EMC immunity requirements % P9 `- y8 H" R(IEC 61547:1995)	# C7 Z1 W, s- QRelevant generic standard(s) . p) \# A1 L2 I: D9 ~) n8 CNote 2.3	" E( b% O2 y: I4 J3 a& \|5 rDate expired : A0 ~+ _4 I/ I! O" t(01.07.1996)
	Amendment A1:2000 to EN 61547:1995 0 P& w7 R1 ?' ]+ M( R3 t (IEC 61547:1995/A1:2000)	Note 3 ! k' N4 m1 B; m& N5 ~# ~	Date expired 8 k' w) R. T& S$ x# s (01.11.2003)
CENELEC	EN 61800-3:1996 ) p' D% U( \8 Y- Q Adjustable speed electrical power drive systems - Part 3: EMC product standard including specific test methods - B9 P# r; k2 s+ H! r* S& C2 T3 V; V (IEC 61800-3:1996)	% J" ~1 u6 B8 K3 h, ? Relevant generic standard(s) + V4 I3 b' T9 CNote 2.3	+ W/ c& E* _* _. KDate expired f9 Q- o$ T$ @: H: D# n9 k (01.04.1997)
	Amendment A11:2000 to EN 61800-3:1996 8 b- m1 [4 F6 I+ T% Q, n	Note 3 : P9 C3 k5 M5 I: r	Date expired , ~& l1 M5 l8 U8 r; m+ h; p(01.01.2002)
CENELEC	EN 61800-3:2004 . C4 v9 y$ U- E4 T1 w; TAdjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods 8 H9 t. j3 z. p7 t- Z" S3 s; l(IEC 61800-3:2004)	4 ]; A3 @$ ~* g EN 61800-3:1996 ( h: m& \9 a. C% K: ~9 g and its amendment ; P/ \|9 y& [" \( y3 j# f3 QNote 2.1	, M. n* p) h& H/ ?& x ^01.10.2007
CENELEC	EN 61812-1:1996 + x! N+ O6 ?. l1 E% `Specified time relays for industrial use - Part 1: Requirements and tests l$ F/ d! N3 Q3 N. g4 P8 `3 K(IEC 61812-1:1996)	! l- a# ]$ p1 j' h y% g$ X -	; I- Q6 K L9 n& W r -
	Amendment A11:1999 to EN 61812-1:1996 * W4 g0 J1 x/ l1 i9 _6 u	Relevant generic standard(s) 7 ^2 l( ~; U( C0 a- u+ ? Note 2.3 , F6 d1 [- B) N	Date expired * O2 Y- G6 i! v* S; Z* J(01.01.2002)
CENELEC	EN 62020:1998 & [& I' Q4 p, u& `/ `5 d& v/ TElectrical accessories - Residual current monitors for household and similar uses (RCMs) 8 U1 u5 j, P6 Q f6 K1 _; z/ Q (IEC 62020:1998)	! `5 c; u! @2 d- R, h -	6 E7 {$ w2 w. z) ~4 q8 \" U-
	Amendment A1:2005 to EN 62020:1998 0 v* W5 [# K2 g$ T2 `3 o(IEC 62020:1998/A1:2003 (Modified))	Relevant generic standard(s) M& H, H4 i( x. C& X0 d# P7 i( i7 \|# s1 F Note 2.3 ) ]7 k5 y4 J; ]3 D& A0 c	01.03.2008
CENELEC	EN 62040-2:2006 i( O* z9 r6 E7 f/ C4 e Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements # X/ T& F. V5 f- @/ W- p! T" \|(IEC 62040-2:2005)	5 D0 n, ]" K1 DEN 50091-2:1995 , {* f6 F1 Z g Note 2.1	. A6 v( i8 r" L4 v# ?01.10.2008
CENELEC	EN 62052-11:2003 , \|; E0 F! j; l& I \6 HElectricity metering equipment (AC) - General requirements, tests and test conditions - Part 11: Metering equipment ' _/ Y" O1 g+ ]% l5 I4 W, {! s I (IEC 62052-11:2003) # G. U f6 {: }: `- J0 y' R+ j+ ^# K% h' ^+ y Note 9	/ M7 j: ]. {' \|$ ?; \8 p2 m* l1 zRelevant generic standard(s) 5 x! m: {. X R( e/ Z. N Note 2.3	! s; y# n& w/ d1 _Date expired ' Q, `) h* o$ ^, N( V (01.03.2006)
CENELEC	EN 62052-21:2004 ! N ~& `( e9 PElectricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 21: Tariff and load control equipment 1 O' S; g- n5 H" ?! p) M! `' b(IEC 62052-21:2004) & ]+ }6 R; b: L0 i6 t, A5 v' a8 ?" \1 `- C. X7 y7 ~ Note 11	/ j% I7 ^& Z- l. w3 DEN 61037:1992 1 u f: g/ h3 o k0 d9 p+ A1:1996 , y/ h1 @2 g( W5 O$ e1 q, ? q% ^+ A2:1998 H4 X5 o' v0 l( \|5 i; _ + EN 61038:1992 1 ?& F3 _7 k+ K3 f% Q5 ~ + A1:1996 2 p: p! R6 b2 t8 r# S! J+ A2:1998 8 X) \|* I8 P1 U' ^Note 2.1	6 f8 Z, n6 @+ K: W, G, j8 Z! Z' lDate expired : \3 P0 e, H* z: A5 g (01.07.2007)
CENELEC	EN 62053-11:2003 3 b9 [! F1 P e/ T) nElectricity metering equipment (a.c.) - Particular requirements - Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2) 3 \% \- Y- `. S, Q7 e$ }6 B(IEC 62053-11:2003)	9 k: _ O7 \0 l: D EN 60521:1995 ' ~8 m& \|' I% tNote 2.1	/ F4 G" H5 v7 W% ?6 \|& }9 [/ ^Date expired 9 J! {5 u0 Y& m9 z% \|: R% T(01.03.2006)
CENELEC	EN 62053-21:2003 ; e6 W) u- j `2 s" i; `* e8 ~ Electricity metering equipment (a.c.) - Particular requirements - Part 21: Static meters for active energy (classes 1 and 2) 4 D7 h5 W# A6 f(IEC 62053-21:2003)	# X* @5 p1 h/ Z, IEN 61036:1996 % n- @8 r* i# D* z+ A1:2000 , B& g6 X! Q) h3 X. O3 O0 DNote 2.1	6 E! E M8 @3 u Date expired 6 l! h; P& f. b X& ] (01.03.2006)
CENELEC	EN 62053-22:2003 ) O' x# F* `5 F: V' t( d4 gElectricity metering equipment (a.c.) - Particular requirements - Part 22: Static meters for active energy (classes 0,2 S and 0,5 S) # c( _8 M8 e) P5 Z8 z) X) X (IEC 62053-22:2003)	/ y6 `7 y6 ^% @* X4 V, KEN 60687:1992 " p0 T7 v" A& E- O' @Note 2.1	* c( i3 b; @" L6 { Date expired , T3 \|7 o3 x7 U (01.03.2006)
CENELEC	EN 62053-23:2003 $ w6 [. b; ^* P: q7 v! yElectricity metering equipment (a.c.) - Particular requirements - Part 23: Static meters for reactive energy (classes 2 and 3) / h5 n; z8 t. h+ h5 m5 ]2 E (IEC 62053-23:2003)	8 B" D8 M9 B2 D% _# J EN 61268:1996 1 R7 X& v; m9 j; @* `' e! c Note 2.1	Q9 i$ f/ G# x+ {. i1 s% \|8 y% q Date expired ( x# s% H8 C1 e( u) q (01.03.2006)
CENELEC	EN 62054-11:2004 9 L8 z. A; w4 u8 @6 g Electricity metering (a.c.) - Tariff and load control - Part 11: Particular requirements for electronic ripple control receivers 4 {- c; a* J1 e( q; ] (IEC 62054-11:2004)	) `; v8 `* j7 t, z- P! H! q EN 61037:1992 8 c5 a, ]. O% [) P2 ~+ A1:1996 # }, x$ P4 `' `; \# W7 E) @9 X + A2:1998 % f) a9 \6 d9 q# Y6 @# \|& ANote 2.1	0 `6 Y1 t- z$ i# _- z# } zDate expired ]+ }! H7 i i; \ (01.07.2007)
CENELEC	EN 62054-21:2004 / \|. }/ k b& G5 ^( @( gElectricity metering (a.c.) - Tariff and load control - Part 21: Particular requirements for time switches 1 M' r8 }5 j z2 T5 @' E7 i(IEC 62054-21:2004)	3 F# j; H- a2 @% ~! q: QEN 61038:1992 N; T! n/ s2 c$ w, I L* d+ A1:1996 ) ^4 {5 a1 C: ]* P" @/ z" A + A2:1998 " w) W* \ m, B1 Q' } Note 2.1	0 F6 ?1 h8 P. x! i8 i& H; j6 gDate expired 5 j& w) I% v: ^$ q(01.07.2007)
CEN	EN 617:2001 Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers / _) s Q0 H# }' Z + U1 t, S( Y/ D% \|5 J" W" ^	—
CEN	EN 618:2002 Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors 3 x6 L" K1 H! U9 ?! \|/ ^" y$ J1 w% H" P4 A/ t	—
CEN	EN 619:2002 Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads - C8 j7 S; I# g" q5 r! V1 R# D " O. t6 G! C5 k	—
CEN	EN 620:2002 Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials + y. P4 e& p" Q' N W4 n# u0 i0 w/ T& E" \|3 I	—
CEN	EN 1155:1997 Building hardware - Electrically powered hold-open devices for swing doors - Requirements and test methods + [! s' o# V, n# `# @ 1 e+ ? K8 Q; s5 J' r	—
CEN	EN 12015:2004 Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Emission ; T& Y( m/ P7 c# ? E % A: [/ p) r5 K% Z0 T	EN 12015:1998 % v- B6 c/ d W, w1 d	Date Expired (30.6.2006) & Z* ~ X3 F3 y5 g6 N; w, ]& n
CEN	EN 12016:2004 Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity / _* U) \|5 w$ Z+ ^+ u) ]8 V - c2 `1 Y/ _) O/ b' ]6 _% J	EN 12016:1998 $ N& J' E2 A4 a	Date Expired (30.6.2006) * J8 `- l& ?* d Z: N
CEN	EN 12895:2000 Industrial trucks - Electromagnetic compatibility . o5 A3 X& r+ J1 \|5 T9 i7 \|1 G 1 w- b6 E' i C2 D4 I1 n	—
CEN	EN 13241-1:2003 Industrial, commercial and garage doors and gates - Product standard - Part 1: Products without fire resistance or smoke control characteristics 4 v, w% d+ k# o! d5 Z" e) e # J" s" f! F: J" \$ B+ m	—
CEN	EN 13309:2000 Construction machinery - Electromagnetic compatibility of machines with internal electrical power supply - W0 M. t [2 l: {0 L4 f. k9 l ; E( V$ P; J! G, E5 X: \|3 C	—
CEN	EN 14010:2003 Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages : O- [7 F+ Q# h* J% l 8 e7 j' b% _4 X$ _% S	—
CEN	EN ISO 14982:1998 0 I, M, r5 u1 `- y, L2 \, {& i" hAgricultural and forestry machines - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998) $ P8 V& ^( a. b3 O	—
ETSI	EN 300 386 V1.2.1 " Z6 u% h8 X( f/ i: ^0 t, }Electromagnetic compatibility and radio spectrum matters (ERM); Telecommunication network equipment; Electromagnetic compatibility (EMC) requirements	EN 300 386-2 V1.1.3	31.8.2007
ETSI	EN 300 386 V1.3.1 1 \|% B& L) {0 G" NElectromagnetic compatibility and radio spectrum matters (ERM); Telecommunication network equipment; Electromagnetic compatibility (EMC) requirements	EN 300 386-2 V.1.1.3	31.8.2007
ETSI	EN 300 386 V1.3.2 2 t4 e, @; W' X j# t9 V6 \| Electromagnetic compatibility and radio spectrum matters (ERM); Telecommunication network equipment; Electromagnetic compatibility (EMC) requirements	EN 300 386-2 V.1.1.3	31.8.2007
ETSI	EN 300 386 V1.3.3 7 `0 \|* }! D. ]# \# M5 e2 xElectromagnetic compatibility and radio spectrum matters (ERM); Telecommunication network equipment; Electromagnetic compatibility (EMC) requirements	EN 300 386-2 V1.1.3	31.8.2007
ETSI	EN 300 386-2 V1.1.3 ) E: W: \|; ~) p6 Y/ t5 i7 WElectromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; Electromagnetic compatibility (EMC) requirements; Part 2: Product family standard

General remark: when there is a stroke in column 3 (reference of the superseded standard), it means that the referenced standard may not be used without amendment or particular part for EMC purpose.

Note 1: Generally the date of cessation of presumption of conformity will be the date of withdrawal ( “dow”), set by the European Standardisation Organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise.

Note 2.1: The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential requirements of the directive.

Note 2.2: The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential requirements of the directive.

Note 2.3: The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential requirements of the directive for those products that fall within the scope of the new standard. Presumption of conformity with the essential requirements of the directive for products that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected.

Note 3: In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard (column 3) therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential requirements of the directive.
Example: For EN 55011:2007, the following applies :

CENELEC	EN 55011:2007 Industrial, scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement ( j: C0 O* Q6 q) }$ F1 t(CISPR 11:2003 (Modified) ' ]# D& ^- w9 h% B) e( i+ A1:2004 (Modified)) 6 a% Y' Y* c+ l4 j) g[The referenced standard is EN 55011:2007] - S, Y* B$ \/ }	+ ^+ H/ u8 M# a# m! i, l j" ] EN 55011:1998, x4 h9 T Z; A7 \ and its amendments [The superseded standard is EN 55011:1998" {$ R6 j7 o6 ]6 y$ B + A1:1999 2 Z, b$ ?( p7 }& a5 n +A2: 2002 to EN 55011:1998] 2 m6 T% l; h* g* s& B1 U# x	1 @; E: p5 X) w& W01.11.2009
	Amendment A2:2007 to EN 55011:2007 - \|+ M. j. L% [(CISPR 11:2003/A2:2006) + r/ J1 J9 z/ \|: A* q7 d" e* L9 w[The referenced standard is EN 55011:2007 + A2:2007 to EN 55011:2007] " _) w/ V0 E* A7 s7 Q5 \- \|' A2 R	Note 3 2 `6 l6 K5 P8 ~" X1 j[The superseded standard is EN 55011:2007] ( _0 e r. I Y) Z	01.11.2009

Note 6: EN 60947-1:1999 does not give presumption of conformity without another part of the standard. EN 60947-1:2004 does not give presumption of conformity without another part of the standard.

Note 7: EN 60730-1:2000 does not give presumption of conformity without another part of the standard.

Note 8: EN 55012 is applicable for giving presumption of conformity under directive 89/336/EEC for those vehicles, boats and internal combustion engine-driven devices that are not within the scope of directives 95/54/EC, 97/24/EC, 2000/2/EC or 2004/104/EC.

Note 9: EN 62052-11:2003 does not give presumption of conformity without a part of the EN 62053 series.

Note 11: EN 62052-21:2004 does not give presumption of conformity without a part of the EN 62054 series.

Last update: 22/10/2007

H-RH · 发表于 2008-10-8 17:10

ETSI EN 300 386 V1.4.1 (2008-04)
ETSI EN 300 386-2 V1.1.3 (1997-12)
ETSI EN 300 386 V1.3.3 (2005-04)
ETSI EN 300 386 V1.3.2 (2003-05)
ETSI EN 300 386 V1.3.1 (2001-09)
ETSI EN 300 386 V1.2.1 (2000-03)
http://www.angui.org/bbs/read.php?tid=27313

Naomi · 发表于 2008-11-7 13:18

最新版本 2008年11月4日

ubuntufan · 发表于 2017-3-10 14:10

F老大，现在EMC指令叫Directive 2014/30/EU

CLXZLX · 发表于 2019-9-6 16:16

老板，麻烦你给个网址不？非常感谢！LVD,ROHS,REACH我都找到了，就是没有看到EMC指令和RED指令下的这些协调标准列表。

wtuzhiyi · 发表于 2022-10-7 14:56

赞赞赞，收藏了

		自动登录	找回密码
密码			注册安规

	安规论坛 \| 仪器设备 \| 求职招聘 \| 国家标准		公告 \| 教程 \| 家电 \| 灯具 \| 环保 \| ITAV		签到充值在线打卡设备		好友\| 帖子\| 空间\| 日志\| 相册
	IP淋雨机 \| 证书查询 \| 规范下载 \| 资质查询		招聘 \| 考试 \| 线缆 \| 玩具 \| 标准 \| 综合		红包邮箱打卡工资禁言		分享\| 记录\| 道具\| 勋章\| 任务

IP淋雨设备\| 恒温恒湿箱\| 拉力机\| 医疗检测设备	沙特Saber 埃及COI 中东GCC｜CoC直接发证机构	水平垂直燃烧机\|灼热丝\|针焰试验机\|漏电起痕试验机
灯头量规\|试验指\|插头插座量规\|灯具检测设备	耐划痕试验机\|可程式恒温恒湿试验箱 \| 耦合器设备	广东安规-原厂生产-满足标准-审核无忧

[欧盟标准] EMC指令2004/108/EC最新协调标准一览表

本帖子中包含更多资源

本帖子中包含更多资源

安规网为您推荐 /2