The percentage ofturns to be short-circuited shall be approximately equal to the short-circuitvoltage expressed as a percentage of the rated supply voltage. The specimenwith the short-circuit shall then be checked as follows. The unloaded transformershall be supplied at 1, 1 times the rated input voltage at ambient temperatureand the input power (watt) measured shall be equal to thevalue of the rated output with a tolerance of ±20%. During the measurement, no adjustments shall bemade.
- }1 F* e: e& R# e, t5 x2 ?( ]
短路测试时的次级线圈匝数确认:当次级短路时测得的输入功率=额定输出功率±20%偏差内 . [! f. m0 C+ j7 w# b5 o) i
各位懂的专家,上面那段标准以这样理解对不对?
8 Y, a* K5 X0 {! ^4 T, [, r
5 t; P& |$ v* |* d$ v
6 O2 A) f) V$ M% m' i2 } |