|
|
Examples of constructions regarded as meeting the requirements include:
– close-fitting tubing (e.g. a heat shrink or synthetic rubber sleeve), applied over the wire and its termination;
- Conductors connected by soldering and held in place near to the termination, independently of the soldered connection;
– conductors connected by soldering and ″hooked in″ before soldering, provided that the hole through which the conductor is passed is not unduly large;
– conductors connected to screw terminals, with an additional fixing near to the terminal that clamps, in the case of stranded conductors, the insulation and not only the conductors;
– conductors connected to screw terminals and provided with terminators which are unlikely to become free (e.g. ring lugs crimped onto the conductors). The pivoting of such terminators is considered
各位能否帮忙翻译下？谢谢！  |
|
/2 
|关于安规|小黑屋|安规QQ群|Archiver|手机版|安规网
( 粤ICP13023453-10 ) 
窥视卡
雷达卡
发表于 2011-6-3 15:47
显身卡
楼主