|
as below for EN request
0 x( j5 w. q4 N( \8 D, U; I0 S- A' C8 F' y
5.4 Cords on toys (see A.29)
' B; {- ]/ G6 g+ C6 sCords shall conform to the following requirements:
3 e' G9 l* Q# V* l- o% G. ]a) Cords shall have a thickness (smallest dimension) of 1,5 mm or more when tested according to 8.20
( z2 D0 h5 b) K7 g1 J, v! S" [3 K(cord thickness). This does not apply to ribbons.
7 O* N- i( {, Y) f* g, GBS EN 71-1:2005+A8:2009
1 q; C/ `, |1 n: TLicensed copy: Vocational Trading Council, Vocational Training Council, Version correct as of 14/05/2009 08:01, (c)9 U! L, n" ?7 ~' g* U0 V
b) The free length of cords (e.g. on pull-along toys) which include attachments that can form nooses shall
3 b, Z X; R& ?4 S/ _either:7 O0 ?, m. }' t* b5 v! H
not exceed 220 mm when stretched by a force of (25 ± 2) N; or: w/ o" x/ F" h) ]4 y6 N3 e- L
when subjected to a force of (25 ± 2) N, separate into parts not exceeding 220 mm when stretched+ s7 R' J4 y6 E" S S
by a force of (25 ± 2) N. It shall be possible to join the parts together after they have been separated" V( S8 N/ P! u( ?, f) _/ r$ Z7 a
without altering the characteristics of the joints (see Figure 10).0 |6 F1 z* m& i& E0 M& p d
The free length of the cord shall be measured from the fixing point to the end of the cord or to the fixing1 ^: U& y. p, ^! A
point on the other part of the toy. If the fixing point has the same shape or form as the cord, this part shall
7 y9 s, a& S* y2 m% d; [ rbe measured as a part of the entire cord (see Figure 11).
: N, x* _2 {/ n$ tc) The perimeter of any nooses on cords shall not exceed 380 mm when stretched by a force of (25 ± 2) N.7 |, w" m! c9 F: A& }
d) Toys with self-retracting cords shall have a mechanism recoil force less than 10 N.
8 y' l0 D" x# S* e0 p1 K5 m- }e) Cords intended to be fixed across cradles, cots, perambulators etc., shall not exceed 750 mm when
/ \, P- V. i, ]: `stretched by a force of (25 ± 2) N, and their length under these conditions shall be not more than 40 %longer than their relaxed length. |
|