风筒19.102非正常温升

juanstery · 发表于 2011-6-23 10:50

2-23说：
power input.
A sheet of polyethylene approximately 200 mm x 200 mm and having a thickness of 50 μm is
placed against the air-inlet and moved in any direction in order to reduce the airflow so that
the most unfavourable conditions are established.
The test is carried out for 30 min.
The test is repeated with the airflow directed horizontally.
NOTE The most unfavourable conditions are usually obtained by positioning the polyethylene sheet so that the
thermal cut-out is prevented from operating.

我搜索到之前的帖子有人把它解释为“ 19.102 限制入风测试,最高档和最低档,风口水平和风口垂直,总共做4部机,限制入风口知道跳制动作,然后微调如风到跳制刚好不跳的状态,最后吹30分钟稳定,”

请问以上解释是对的吗？

但有人认为是“不断反复让THERMOSTAT跳和不跳之间测试30分钟”。

请问以上哪种观点是正确的？

BTW:要对thermal cut-out有个根本的认知，本人认为thermal cut-out是风筒上的fuse,而不是自复位的thermostat.

极品老工 · 发表于 2011-6-23 11:42

为何不读读GB4706.15的19.102。

mingck · 发表于 2011-6-23 11:55

"限制入风口知道跳制动作,然后微调如风到跳制刚好不跳的状态,吹30分钟稳定,”这样做是正确的.

山炮 · 发表于 2011-6-23 12:42

BTW:要对thermal cut-out有个根本的认知，本人认为thermal cut-out是风筒上的fuse,而不是自复位的thermostat.

行业中所能见到的热断路器和温控器在称谓、外观形状、标称参数等方面并不一定截然分开，也不必截然分开。一个温度控制元件，只有被应用到器具中，明确它特定的控制目的，才具有定义中的具体含义。那楼主认为这个部件是为了正常工作时控制温度还是故障时防止温度过高？叫什么不重要，关键是其控制的目的。

juanstery · 发表于 2011-6-23 13:35

专家，既然知道结果何必不告诉我一个结论呢？

因THERMAL-CUT OUT 本人认定此风筒上的FUSE,而不是thermostat,就是偏向于第二种观点，也就是避免PREVENT 保险丝烧，让THERMOSTAT在30分钟不断的做往复工作。。

红豆绿豆 · 发表于 2011-6-23 17:12

FUSE不可认为THERMAL-CUT OUT

极品老工 · 发表于 2011-6-23 17:16

那俗称叫热FUSE的算不？不是电流FUSE。

shiya888 · 发表于 2011-6-23 22:59

吹风机中那个热保护器不是thermostat,而是self-resetting thermal cut-out.
3.7.1
thermostat
temperature-sensing device, the operating temperature of which may be either fixed or
adjustable and which during normal operation keeps the temperature of the controlled part
between certain limits by automatically opening and closing a circuit
3.7.2
temperature limiter
temperature-sensing device, the operating temperature of which may be either fixed or
adjustable and which during normal operation operates by opening or closing a circuit when
the temperature of the controlled part reaches a predetermined value
NOTE It does not make the reverse operation during the normal duty cycle of the appliance. It may or may not
require manual resetting.
3.7.3
thermal cut-out
device which during abnormal operation limits the temperature of the controlled part by
automatically opening the circuit, or by reducing the current, and is constructed so that its
setting cannot be altered by the user
3.7.4
self-resetting thermal cut-out
thermal cut-out that automatically restores the current after the relevant part of the appliance
has cooled down sufficiently

zero517 · 发表于 2011-6-23 23:13

如果LZ碰到没fuse的电吹风就不会烦恼了！

		自动登录	找回密码
密码			注册安规

	安规论坛 \| 仪器设备 \| 求职招聘 \| 国家标准		公告 \| 教程 \| 家电 \| 灯具 \| 环保 \| ITAV		签到充值在线打卡设备		好友\| 帖子\| 空间\| 日志\| 相册
	IP淋雨机 \| 证书查询 \| 规范下载 \| 资质查询		招聘 \| 考试 \| 线缆 \| 玩具 \| 标准 \| 综合		红包邮箱打卡工资禁言		分享\| 记录\| 道具\| 勋章\| 任务

IP淋雨设备\| 恒温恒湿箱\| 拉力机\| 医疗检测设备	沙特Saber 埃及COI 中东GCC｜CoC直接发证机构	水平垂直燃烧机\|灼热丝\|针焰试验机\|漏电起痕试验机
灯头量规\|试验指\|插头插座量规\|灯具检测设备	耐划痕试验机\|可程式恒温恒湿试验箱 \| 耦合器设备	广东安规-原厂生产-满足标准-审核无忧

[IEC标准产品] 风筒19.102非正常温升

回 4楼(juanstery) 的帖子

安规网为您推荐 /2