标题: 请教：BS1363-1 clause 12.11.1, clause 20如何理解 [打印本页] 作者: wz0777 时间: 2009-6-2 18:08 标题: 请教：BS1363-1 clause 12.11.1, clause 20如何理解 各位大侠： # \. F* g& B, e5 {关于BS1363-1中，clause 12.11.1* t$ w, q1 e5 R- L
Compliance shall be checked by the following test. + ]- \: W& r/ X, d" A+ aAfter the tests described in clause 20 each pin is subjected for 60 s to a pull of 100 N without jerks in the direction of the major axis. The plug is mounted using the steel plate shown in figure 7. The apparatus is placed within an oven and the pull is applied at least 1 h after the plug body has attained the test temperature of 65-75C, while maintained at this temperature.9 `9 w* @) q( }" y
是说先做完20章的机械强度测试后，在65-75下的拉力测试。 6 m+ I; m$ X5 {但是clause 207 E5 I% Q7 `( w" [: y8 J% P
The sample shall then be checked by inspection, and shall comply with the appropriate thest described in clasue 16, and the gauge in accordance with figure 5 when used in a manner as described in 12.2.1 but with a force not exceeding 20 N2 `- u; {4 N- h1 f1 l
我的理解是做完这一章节的测试后，需要满足16章的温升，满足12.2.1能插入量规 8 e9 ?; Q" s; y2 v5 k # I9 `; X% E5 @6 K请问，这个测试的顺序应该是： ; `% Q1 O5 _. W/ ^" i0 q. y1. 先做clause 20的测试后，做clause 16温升，然后在做clause 12.11.1: B* Z. d4 ]$ t2 r7 A) G
2. 先做clause 20的测试后，做clause 12.11.1，然后在做clause 16的温升测试呢？ 9 g# Y% |& v# _9 V) v; e3.其他 0 p" D+ k4 U6 C1 ?( b, |; A ; k1 a& ^$ J& y1 k# ~3 B% J4 G! `: f请各位大侠帮忙，谢谢！作者: niuhaier 时间: 2009-11-1 17:22
先做滚筒，然后测试拉力，接着老化，最后用量规测试相关尺寸