标题: 北美插座插拔力测试先插拔10下治具疑惑求解 [打印本页] 作者: billma 时间: 2024-7-17 11:32 标题: 北美插座插拔力测试先插拔10下治具疑惑求解 本帖最后由 billma 于 2024-7-17 11:43 编辑 8 L3 m2 Z& |% w- A, G/ f1 O. _9 `0 G( D
UL498插座插拔力吊重测试，5-15R/5-20R/6-15R/6-20R插拔力测试前先插拔10下，标准上治具图是5-15P与6-15P二款插头图，插片前端有孔接地为圆型，( k: a1 Q$ i: V# C7 R
1.10次插拔的5-15P/5-20P/6-15P/6-20P用接地圆针带孔插片插头？还是用不带孔插片插头？接地要D型吗？1 B8 b8 F5 r0 Z* A
2.15磅脱落测试5-15P/5-20P/6-15P/6-20P用接地圆针带孔插片插头？还是接地D型插头？$ ^- b. |9 [' V' W+ ^1 P& |$ k* V/ q 作者: jeremyho88 时间: 2024-8-29 16:23
111.2 Receptacles having the break-off tab, when provided, removed from one nonidentified terminal are to be subjected to ten conditioning cycles of manual insertion and withdrawal of a standard gauge, see Figure 111.1. Each of six devices is to be tested. The gauge is to be configured as outlined in Table 111.1. The force applied to insert the gauge for any of the conditioning cycles is not to exceed 40 lbf (178 N). The gauge is to have the dimensions indicated in Figure 111.1 but is not to have holes in the outer ends of the blades. " k# \* { c [4 o: d; X! m插片无孔，地线圆形