AfPS Decision on PAHs for GS-Mark Certification, 4 August 2014 | ||||||
Substance name | CAS No. | Limit (mg/kg) | ||||
Category 1 | Category 2 | Category 3 | ||||
Materials, that are intended to be taken in the mouth or materials in toys with proper and long-term skin contact (longer than 30s) | Materials, not covered in Cat.1, with foreseeable contact to skin longer than 30s (long-term skin contact) or repeated short-term skin contacts | Materials, that do not fall in Cat. 1 or 2, with foreseeable contact to skin up to 30s (short-term skin contact) | ||||
Toys in 2009/48/EC | Other products in ProdSG | Toys in 2009/48/EC | Other products in ProdSG | |||
Benzo[a]pyrene (BaP) | 50-32-8 | < 0.2 | < 0.2 | < 0.5 | < 0.5 | < 1 |
Benzo[e]pyrene (BeP) | 192-97-2 | < 0.2 | < 0.2 | < 0.5 | < 0.5 | < 1 |
Benzo[a]anthracene (BaA) | 56-55-3 | < 0.2 | < 0.2 | < 0.5 | < 0.5 | < 1 |
Benzofluoranthene (BbFA) | 205-99-2 | < 0.2 | < 0.2 | < 0.5 | < 0.5 | < 1 |
Benzo[j]fluoranthene (BjFA) | 205-82-3 | < 0.2 | < 0.2 | < 0.5 | < 0.5 | < 1 |
Benzo[k]fluoranthene (BkFA) | 207-08-9 | < 0.2 | < 0.2 | < 0.5 | < 0.5 | < 1 |
Chrysene (CHR) | 218-01-9 | < 0.2 | < 0.2 | < 0.5 | < 0.5 | < 1 |
Dibenzo[a,h]anthracene (DBAhA) | 53-70-3 | < 0.2 | < 0.2 | < 0.5 | < 0.5 | < 1 |
Benzo[g,h,i]perylene | 191-24-2 | < 0.2 | < 0.2 | < 0.5 | < 0.5 | < 1 |
Indeno[1,2,3-cd]pyrene | 193-39-5 | < 0.2 | < 0.2 | < 0.5 | < 0.5 | < 1 |
Acenaphthylene | 208-96-8 | Sum: < 1 | Sum: < 5 | Sum: < 10 | Sum: < 20 | Sum: < 50 |
Acenaphthene | 83-32-9 | |||||
Fluorene | 86-73-7 | |||||
Phenanthrene | 85-01-8 | |||||
Pyrene | 129-00-0 | |||||
Anthracene | 120-12-7 | |||||
Fluoranthene | 206-44-0 | |||||
Naphthalene | 91-20-3 | < 1 | < 2 | < 10 | ||
Sum of 18 PAH above | < 1 | < 5 | < 10 | < 20 | < 50 |
GS Mark Certificate | When to comply with the new PAHs requirements? |
Issuance of new GS Mark certificate from 1st July 2015 onwards (note for exceptions below) | Before the issuance of the GS Mark certificate |
GS Mark certificate issued before 1st July 2015 | Existing GS Mark certificates are still valid. The new PAHs requirements should be considered during the next factory inspection (within 1 or 2 years depends on the regular control period of the certificate) |
Re-issuance of existing GS Mark certificate - Exceptions | A. For non-technical changes, such as the change of company name, relocation of license holder, immediate consideration of new PAH requirement is not a must. However, this should be addressed during the next factory inspection. B. For the new issuance of secondary certificates and its related main-certificate, new PAH requirements must be complied before the next factory inspection, but not later than 28th December 2015. |
欢迎光临 安规网 (http://bbs2.angui.org/) | Powered by Discuz! X3.2 |